[Fri Jun 14 10:15:45 2013] Detection parameters:
  Position = (318.2, 348.1) = 18 19 23.71 -14 53 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 16.8
  Background counts = 101.0
  Rate = 0.001 +/- 0.0003

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 3.87'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 8.37"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.064
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 8.37"
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src70.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src70.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src70.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri Jun 14 10:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src70.csv
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri Jun 14 10:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src70.csv
[Fri Jun 14 10:16:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:30 2013] Spatial fit model total counts = 931.989000, observed total counts = 804.000000
[Fri Jun 14 10:17:30 2013] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 8.37"
[Fri Jun 14 10:18:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.064
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 8.37"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src70.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src70.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src70.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri Jun 14 10:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri Jun 14 10:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Fri Jun 14 10:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 979.735000, observed total counts = 804.000000
[Fri Jun 14 10:18:57 2013] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:58 2013] Assessing source extent using major
[Fri Jun 14 10:18:58 2013] Source does appear to be extended
[Fri Jun 14 10:18:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:19 2013] XMMSAS src. selection expression = ellipse(27635.392242, 30235.210205, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66_src.reg
[Sat Jun 15 12:54:19 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (281, 311) - (356, 386)
[Sat Jun 15 12:54:19 2013] XMMSAS bgd. selection expression = annulus(27635.392242, 30235.210205, 1087.500000, 2175.000000, X, Y) && !ellipse(25981.074000, 31619.382000, 407.964012, 407.964012, 0.000000, X, Y) && !ellipse(24725.876000, 28792.534000, 842.960024, 842.960024, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26596.441400, 28635.481200, 261.964008, 261.964008, 0.000000, X, Y) && !ellipse(25338.454712, 32166.523651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30635.854126, 27795.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.698517, 29520.861298, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:19 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66.gif
[Sat Jun 15 14:03:21 2013] Mean detx,y = (2633.37, -5994.41) 
[Sat Jun 15 14:03:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 14:03:38 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 14:03:38 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Sat Jun 15 14:03:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Sun Jun 16 10:44:30 2013] Not generating rmf since there are only 75 counts
[Sun Jun 16 10:44:30 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:47 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:47 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66_src_b10.pi.gz = 612.00
[Sun Jun 16 10:50:47 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66_bgd.pi.gz = 3903.00
[Sun Jun 16 10:50:47 2013] Got source and background scale factors 1290674.000000, 9817830.000000
[Sun Jun 16 10:50:47 2013] User source parameters:
  Position = (318.2, 348.1) = 18 19 23.71 -14 53 7.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 98.9 +/- 25.8
  Background aperture counts = 513.1
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 10:50:47 2013] Updating counts from extracted products
[Sun Jun 16 10:50:47 2013] Set source signif. to 98.90/22.65 = 4.37
[Sun Jun 16 10:50:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:55 2013] Using photon index=1.80, rate=0.00132, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66.arf
[Sun Jun 16 10:50:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:55 2013] Updating source flux to 3e-14
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete