[Fri Jun 14 10:15:45 2013] Detection parameters:
  Position = (397.2, 204.3) = 18 18 59.98 -15 3 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 432.6 +/- 29.4
  Background counts = 84.7
  Rate = 0.006 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 9.89'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 11.37"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.773
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 11.37"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src14.csv
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src14.csv
[Fri Jun 14 10:16:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 14 centroid is now closest to src. 48
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 2689.520000, observed total counts = 2690.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 56 = 2.902250 pixels
[Fri Jun 14 10:17:29 2013] Warning, changing simple spatial fit ID from 14 to 21
[Fri Jun 14 10:17:29 2013] 2743.818000 total counts/ 2016.510000 bgd. counts: snr = 16.196388
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 2.902250 pixels
  Position = (396.9, 201.4) = 18 19 0.06 -15 3 45.2
  Extent = 22.1 (21.5-22.4)", rotation angle = 0
  Source counts = 727.3 +/- 52.4
  Background counts = 2016.5
  Rate = 0.01 +/- 0.0007
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 51
[Fri Jun 14 10:17:30 2013] Source is confused with source 54
[Fri Jun 14 10:17:30 2013] Source is confused with source 48
[Fri Jun 14 10:17:30 2013] Source is confused with source 55
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 22.08"
[Fri Jun 14 10:18:02 2013] source mask rpix=5.1, npix_max = 124, mask sum = 102, frac = 0.820
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 22.08"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src14.csv
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src14.csv
[Fri Jun 14 10:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 14 centroid is now closest to src. 42
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:16 2013] XMMSAS src. selection expression = ellipse(34484.547400, 17476.140000, 1324.680038, 1324.680038, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56_src.reg
[Sat Jun 15 12:54:16 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (321, 125) - (473, 278)
[Sat Jun 15 12:54:16 2013] XMMSAS bgd. selection expression = annulus(34484.547400, 17476.140000, 2207.800064, 4415.600127, X, Y) && !ellipse(33683.166400, 20703.640000, 1314.200038, 1314.200038, 0.000000, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(33445.650000, 22238.368000, 1552.200045, 1552.200045, 0.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(32874.906000, 22584.096000, 1586.176046, 1586.176046, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(36076.083496, 16884.479019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.369476, 21145.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.084000, 20911.065800, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(38006.401306, 17699.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35941.704498, 17946.851822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.123932, 19419.408066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(38060.149719, 18293.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(37008.081085, 18220.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.776031, 19576.871216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35236.703949, 22451.954651, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56.gif
[Sat Jun 15 13:09:52 2013] Mean detx,y = (10337.40, 6009.42) 
[Sat Jun 15 13:09:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:10:44 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:10:44 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Jun 15 13:10:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun Jun 16 10:50:26 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:26 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 4359.00
[Sun Jun 16 10:50:26 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 6505.00
[Sun Jun 16 10:50:26 2013] Got source and background scale factors 4468298.000000, 21862008.000000
[Sun Jun 16 10:50:26 2013] User source parameters:
  Position = (396.9, 201.4) = 18 19 0.06 -15 3 45.2
  Extent = 22.1 (21.5-22.4)", rotation angle = 0
  Source aperture counts = 3029.5 +/- 67.0
  Background aperture counts = 1329.5
  Rate = 0.04 +/- 0.0009

[Sun Jun 16 10:50:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:52 2013] Using photon index=1.80, rate=0.00971, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56.arf
[Sun Jun 16 10:50:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:52 2013] Getting flux using calc_pl_flux failed
[Sun Jun 16 10:51:36 2013] Flag c found in src. 56 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete