[Fri Jun 14 10:15:45 2013] Detection parameters:
  Position = (413.7, 206.8) = 18 18 55.03 -15 3 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.3 +/- 22.8
  Background counts = 89.4
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 10.67'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 11.76"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.022
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 11.76"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src53.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src53.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src53.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Jun 14 10:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Jun 14 10:16:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri Jun 14 10:16:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 53 centroid is now closest to src. 53
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 54
[Fri Jun 14 10:17:30 2013] Source is confused with source 53
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 11.76"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.022
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 11.76"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src53.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src53.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jun 14 10:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jun 14 10:18:06 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jun 14 10:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri Jun 14 10:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 53 centroid is now closest to src. 54
[Fri Jun 14 10:18:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:58 2013] Assessing source extent using major
[Fri Jun 14 10:18:58 2013] Source does appear to be extended
[Fri Jun 14 10:18:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:18 2013] XMMSAS src. selection expression = ellipse(35941.704498, 17946.851822, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:18 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52_src.reg
[Sat Jun 15 12:54:18 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (376, 169) - (451, 244)
[Sat Jun 15 12:54:18 2013] XMMSAS bgd. selection expression = annulus(35941.704498, 17946.851822, 1087.500000, 2175.000000, X, Y) && !ellipse(33683.166400, 20703.640000, 1314.200038, 1314.200038, 0.000000, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(34484.547400, 17476.140000, 1766.240051, 1766.240051, 0.000000, X, Y) && !ellipse(36076.083496, 16884.479019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.084000, 20911.065800, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(38006.401306, 17699.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.123932, 19419.408066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(38060.149719, 18293.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(37008.081085, 18220.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.776031, 19576.871216, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:18 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52.gif
[Sat Jun 15 13:49:38 2013] Mean detx,y = (11611.94, 5785.81) 
[Sat Jun 15 13:49:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:49:50 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:49:50 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Jun 15 13:49:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun Jun 16 10:24:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 10:24:17 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:42 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:42 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 1210.00
[Sun Jun 16 10:50:42 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52_bgd.pi.gz = 109.00
[Sun Jun 16 10:50:42 2013] Got source and background scale factors 1124210.000000, 294400.000000
[Sun Jun 16 10:50:42 2013] User source parameters:
  Position = (413.7, 206.8) = 18 18 55.03 -15 3 24.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 793.8 +/- 35.8
  Background aperture counts = 416.2
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 10:50:42 2013] Updating counts from extracted products
[Sun Jun 16 10:50:42 2013] Set source signif. to 793.77/20.40 = 38.91
[Sun Jun 16 10:50:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:54 2013] Using photon index=1.80, rate=0.0106, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52.arf
[Sun Jun 16 10:50:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:54 2013] Updating source flux to 5.8e-13
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete