[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (383.5, 227.0) = 18 19 4.10 -15 1 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.0 +/- 26.7
  Background counts = 100.8
  Rate = 0.007 +/- 0.0007

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 8.05'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.45"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 14 10:16:38 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jun 14 10:17:29 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 10.678009 pixels away
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 2663.670000, observed total counts = 2564.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 42 = 7.833546 pixels
[Fri Jun 14 10:17:29 2013] Warning, changing simple spatial fit ID from 10 to 45
[Fri Jun 14 10:17:29 2013] 2587.632000 total counts/ 1850.810000 bgd. counts: snr = 17.127015
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 7.833546 pixels
  Position = (390.9, 229.4) = 18 19 1.87 -15 1 43.5
  Extent = 21.9 (21.8-43.8)", rotation angle = 0
  Source counts = 736.8 +/- 50.9
  Background counts = 1850.8
  Rate = 0.01 +/- 0.0007
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 35
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 21.92"
[Fri Jun 14 10:18:02 2013] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.986
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 21.92"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jun 14 10:18:03 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 10 centroid is now closest to src. 35
[Fri Jun 14 10:18:57 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 16.151670 pixels away
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 2553.360000, observed total counts = 2474.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 42 = 2.294374 pixels
[Fri Jun 14 10:18:57 2013] Warning, changing simple spatial fit ID from 10 to 40
[Fri Jun 14 10:18:57 2013] 2423.113100 total counts/ 2338.710000 bgd. counts: snr = 1.745300
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.294374 pixels
  Position = (390.2, 227.2) = 18 19 2.07 -15 1 53.1
  Extent = 10.9 (7.1-15.1)", rotation angle = 0
  Source counts = 84.4 +/- 49.2
  Background counts = 2338.7
  Rate = 0.001 +/- 0.0007
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:16 2013] XMMSAS src. selection expression = ellipse(33902.270000, 19720.274000, 655.206019, 655.206019, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42_src.reg
[Sat Jun 15 12:54:16 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (353, 190) - (428, 265)
[Sat Jun 15 12:54:16 2013] XMMSAS bgd. selection expression = annulus(33902.270000, 19720.274000, 1092.010031, 2184.020063, X, Y) && !ellipse(33683.166400, 20703.640000, 1314.200038, 1314.200038, 0.000000, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(33445.650000, 22238.368000, 1552.200045, 1552.200045, 0.000000, X, Y) && !ellipse(32874.906000, 22584.096000, 1586.176046, 1586.176046, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(34484.547400, 17476.140000, 1766.240051, 1766.240051, 0.000000, X, Y) && !ellipse(36076.083496, 16884.479019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.369476, 21145.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.084000, 20911.065800, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(35941.704498, 17946.851822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35236.703949, 22451.954651, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42.gif
[Sat Jun 15 13:02:41 2013] Mean detx,y = (9515.86, 4053.61) 
[Sat Jun 15 13:02:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:02:52 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:02:52 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Jun 15 13:02:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sat Jun 15 14:30:15 2013] Not generating rmf since there are only 84 counts
[Sat Jun 15 14:30:15 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:25 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:25 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 2323.00
[Sun Jun 16 10:50:25 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 502.00
[Sun Jun 16 10:50:25 2013] Got source and background scale factors 1322032.000000, 1397484.000000
[Sun Jun 16 10:50:25 2013] User source parameters:
  Position = (390.2, 227.2) = 18 19 2.07 -15 1 53.1
  Extent = 10.9 (7.1-15.1)", rotation angle = 0
  Source aperture counts = 1848.1 +/- 49.2
  Background aperture counts = 474.9
  Rate = 0.02 +/- 0.0007

[Sun Jun 16 10:50:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:51 2013] Using photon index=1.80, rate=0.00113, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42.arf
[Sun Jun 16 10:50:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:51 2013] Updating source flux to 4e-14
[Sun Jun 16 10:51:36 2013] Flag c found in src. 42 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete