[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (469.1, 229.8) = 18 18 38.39 -15 1 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.1 +/- 24.0
  Background counts = 64.3
  Rate = 0.004 +/- 0.0003

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 13.34'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 13.10"
[Fri Jun 14 10:16:38 2013] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.892
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 13.10"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 33 centroid is now closest to src. 38
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 13.10"
[Fri Jun 14 10:18:02 2013] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.892
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 13.10"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src33.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src33.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src33.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Jun 14 10:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 33 centroid is now closest to src. 38
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(40765.531647, 19944.827744, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (432, 192) - (507, 267)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(40765.531647, 19944.827744, 1087.500000, 2175.000000, X, Y) && !ellipse(40102.411530, 20046.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(38006.401306, 17699.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.123932, 19419.408066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38060.149719, 18293.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.776031, 19576.871216, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39.gif
[Sat Jun 15 13:31:44 2013] Mean detx,y = (16142.92, 3448.51) 
[Sat Jun 15 13:31:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:32:01 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:32:01 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Jun 15 13:32:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jun 16 09:52:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 09:52:10 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:32 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:32 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 678.00
[Sun Jun 16 10:50:32 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 1155.00
[Sun Jun 16 10:50:32 2013] Got source and background scale factors 971906.000000, 3762587.000000
[Sun Jun 16 10:50:32 2013] User source parameters:
  Position = (469.1, 229.8) = 18 18 38.39 -15 1 42.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 379.7 +/- 27.1
  Background aperture counts = 298.3
  Rate = 0.005 +/- 0.0004

[Sun Jun 16 10:50:32 2013] Updating counts from extracted products
[Sun Jun 16 10:50:32 2013] Set source signif. to 379.65/17.27 = 21.98
[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.00507, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:53 2013] Updating source flux to 3.7e-13
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete