[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (251.1, 237.9) = 18 19 43.84 -15 1 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.1 +/- 23.4
  Background counts = 86.2
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 5.57'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.094
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.21"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Jun 14 10:17:29 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 12.689990 pixels away
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.094
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.21"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 10:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 879.999000, observed total counts = 880.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 37 = 0.083790 pixels
[Fri Jun 14 10:18:57 2013] 875.908000 total counts/ 718.484000 bgd. counts: snr = 5.873032
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.083790 pixels
  Position = (251.2, 237.9) = 18 19 43.82 -15 1 6.6
  Extent = 3.9 (3.2-4.4)", rotation angle = 0
  Source counts = 157.4 +/- 29.6
  Background counts = 718.5
  Rate = 0.002 +/- 0.0004
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(21807.529660, 20651.818400, 231.588007, 231.588007, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (238, 225) - (265, 251)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(21807.529660, 20651.818400, 385.980011, 771.960022, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37.gif
[Sat Jun 15 13:19:28 2013] Mean detx,y = (-2608.74, 3860.66) 
[Sat Jun 15 13:19:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:19:36 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:19:36 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jun 15 13:19:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jun 16 10:50:29 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:29 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 225.00
[Sun Jun 16 10:50:30 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 481.00
[Sun Jun 16 10:50:30 2013] Got source and background scale factors 168000.000000, 1399180.000000
[Sun Jun 16 10:50:30 2013] User source parameters:
  Position = (251.2, 237.9) = 18 19 43.82 -15 1 6.6
  Extent = 3.9 (3.2-4.4)", rotation angle = 0
  Source aperture counts = 167.2 +/- 16.0
  Background aperture counts = 57.8
  Rate = 0.002 +/- 0.0002

[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:53 2013] Updating source flux to 6.8e-14
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete