[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (389.6, 240.0) = 18 19 2.25 -15 0 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.9 +/- 35.3
  Background counts = 89.6
  Rate = 0.01 +/- 0.0009

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 7.85'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.36"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 14 10:16:38 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 3425.090000, observed total counts = 3427.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 35 = 2.055182 pixels
[Fri Jun 14 10:17:29 2013] 3366.380000 total counts/ 2634.500000 bgd. counts: snr = 14.259056
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 2.055182 pixels
  Position = (389.6, 242.0) = 18 19 2.27 -15 0 48.7
  Extent = 20.7 (20.6-41.4)" x 7.5 (6.2-8.7)", rotation angle = 114 (110-120) degrees
  Source counts = 731.9 +/- 58.0
  Background counts = 2634.5
  Rate = 0.01 +/- 0.0008
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.37
[Fri Jun 14 10:17:30 2013] Source is asymmetric
[Fri Jun 14 10:17:30 2013] Source is confused with source 29
[Fri Jun 14 10:17:30 2013] Source is confused with source 1
[Fri Jun 14 10:17:30 2013] Source is confused with source 42
[Fri Jun 14 10:17:30 2013] Source is confused with source 32
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Fri Jun 14 10:18:02 2013] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.996
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 14.13"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 14 10:18:03 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 4 centroid is now closest to src. 44
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 8920.100000, observed total counts = 8755.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 35 = 5.565421 pixels
[Fri Jun 14 10:18:57 2013] Warning, changing simple spatial fit ID from 4 to 10
[Fri Jun 14 10:18:57 2013] 8015.540000 total counts/ 4504.690000 bgd. counts: snr = 52.309410
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 5.565421 pixels
  Position = (390.1, 236.5) = 18 19 2.11 -15 1 12.8
  Extent = 26.1 (24.2-28.8)", rotation angle = 0
  Source counts = 3510.8 +/- 89.5
  Background counts = 4504.7
  Rate = 0.05 +/- 0.001
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 3462.040000, observed total counts = 3402.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 35 = 3.165768 pixels
[Fri Jun 14 10:18:57 2013] Warning, changing simple spatial fit ID from 10 to 12
[Fri Jun 14 10:18:57 2013] 2252.465000 total counts/ 1895.870000 bgd. counts: snr = 8.189756
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 3.165768 pixels
  Position = (387.7, 238.5) = 18 19 2.83 -15 1 3.9
  Extent = 16.4 (11.7-19.7)", rotation angle = 0
  Source counts = 356.6 +/- 47.5
  Background counts = 1895.9
  Rate = 0.005 +/- 0.0006
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:16 2013] XMMSAS src. selection expression = ellipse(33683.166400, 20703.640000, 985.650028, 985.650028, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jun 15 12:54:16 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (331, 182) - (444, 295)
[Sat Jun 15 12:54:16 2013] XMMSAS bgd. selection expression = annulus(33683.166400, 20703.640000, 1642.750047, 3285.500095, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(33445.650000, 22238.368000, 1552.200045, 1552.200045, 0.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(32874.906000, 22584.096000, 1586.176046, 1586.176046, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(34484.547400, 17476.140000, 1766.240051, 1766.240051, 0.000000, X, Y) && !ellipse(31883.080688, 23041.039276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30709.872000, 23921.168000, 1340.584039, 1340.584039, 0.000000, X, Y) && !ellipse(36076.083496, 16884.479019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.369476, 21145.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(34245.084000, 20911.065800, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(35941.704498, 17946.851822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(37008.081085, 18220.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35236.703949, 22451.954651, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35.gif
[Sat Jun 15 12:55:36 2013] Mean detx,y = (9383.72, 3199.30) 
[Sat Jun 15 12:55:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 12:55:56 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 12:55:56 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jun 15 12:55:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Jun 16 10:50:22 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:22 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 4789.00
[Sun Jun 16 10:50:22 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1150.00
[Sun Jun 16 10:50:22 2013] Got source and background scale factors 2958084.000000, 3454321.000000
[Sun Jun 16 10:50:22 2013] User source parameters:
  Position = (387.7, 238.5) = 18 19 2.83 -15 1 3.9
  Extent = 16.4 (11.7-19.7)", rotation angle = 0
  Source aperture counts = 3804.2 +/- 70.2
  Background aperture counts = 984.8
  Rate = 0.05 +/- 0.0009

[Sun Jun 16 10:50:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:51 2013] Using photon index=1.80, rate=0.00476, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35.arf
[Sun Jun 16 10:50:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:51 2013] Updating source flux to 1.8e-13
[Sun Jun 16 10:51:36 2013] Flag c found in src. 35 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete