[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (397.8, 240.9) = 18 18 59.81 -15 0 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 317.9 +/- 28.4
  Background counts = 109.3
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 8.32'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.59"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src28.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src28.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Jun 14 10:17:29 2013] Source 32 is offset by -6.994128 and 7.138883 pixels which is larger than
2 X fitted extent = 1.276589 x 1.276589, not incorporating fit results
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 28 centroid is now closest to src. 30
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 35
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 10.59"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src28.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src28.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Jun 14 10:18:57 2013] Source 32 is offset by -1.192887 and -7.059876 pixels which is larger than
2 X fitted extent = 1.560759 x 1.560759, not incorporating fit results
[Fri Jun 14 10:18:57 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 14.628687 pixels away
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 2878.380000, observed total counts = 2880.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 32 = 3.614075 pixels
[Fri Jun 14 10:18:57 2013] 2339.091000 total counts/ 1666.880000 bgd. counts: snr = 16.464686
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 3.614075 pixels
  Position = (394.2, 240.9) = 18 19 0.89 -15 0 53.5
  Extent = 21.2 (20.1-42.4)", rotation angle = 0
  Source counts = 672.2 +/- 48.4
  Background counts = 1666.9
  Rate = 0.009 +/- 0.0006
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(34245.084000, 20911.065800, 1270.812037, 1270.812037, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (321, 168) - (467, 314)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(34245.084000, 20911.065800, 2118.020061, 4236.040122, X, Y) && !ellipse(33683.166400, 20703.640000, 1314.200038, 1314.200038, 0.000000, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(33445.650000, 22238.368000, 1552.200045, 1552.200045, 0.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(32874.906000, 22584.096000, 1586.176046, 1586.176046, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(34484.547400, 17476.140000, 1766.240051, 1766.240051, 0.000000, X, Y) && !ellipse(31883.080688, 23041.039276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30709.872000, 23921.168000, 1340.584039, 1340.584039, 0.000000, X, Y) && !ellipse(36076.083496, 16884.479019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.369476, 21145.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(38006.401306, 17699.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35941.704498, 17946.851822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.644140, 26240.880600, 1530.608044, 191.325606, 23.305300, X, Y) && !ellipse(37971.123932, 19419.408066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(38060.149719, 18293.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(37008.081085, 18220.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.776031, 19576.871216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38395.349823, 24537.798767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35236.703949, 22451.954651, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32.gif
[Sat Jun 15 13:20:14 2013] Mean detx,y = (9706.98, 2965.09) 
[Sat Jun 15 13:20:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:20:38 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:20:38 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Jun 15 13:20:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Jun 16 10:50:30 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:30 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 7181.00
[Sun Jun 16 10:50:31 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 4346.00
[Sun Jun 16 10:50:31 2013] Got source and background scale factors 5000960.000000, 11451831.000000
[Sun Jun 16 10:50:31 2013] User source parameters:
  Position = (394.2, 240.9) = 18 19 0.89 -15 0 53.5
  Extent = 21.2 (20.1-42.4)", rotation angle = 0
  Source aperture counts = 5283.1 +/- 85.7
  Background aperture counts = 1897.9
  Rate = 0.07 +/- 0.001

[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.00897, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:53 2013] Updating source flux to 2.8e-13
[Sun Jun 16 10:51:36 2013] Flag b found in src. 32 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] Flag c found in src. 32 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete