[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (356.2, 273.4) = 18 19 12.29 -14 58 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.2 +/- 22.8
  Background counts = 93.3
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 4.56'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.798
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.71"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src19.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src19.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 19 centroid is now closest to src. 23
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 1540.110000, observed total counts = 1534.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 24 = 3.388329 pixels
[Fri Jun 14 10:17:29 2013] Warning, changing simple spatial fit ID from 19 to 37
[Fri Jun 14 10:17:29 2013] 1554.900000 total counts/ 990.438000 bgd. counts: snr = 17.935813
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 3.388329 pixels
  Position = (353.5, 275.5) = 18 19 13.10 -14 58 23.1
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source counts = 564.5 +/- 39.4
  Background counts = 990.4
  Rate = 0.008 +/- 0.0005
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 23
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 16.76"
[Fri Jun 14 10:18:02 2013] source mask rpix=3.9, npix_max = 75, mask sum = 81, frac = 1.069
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 16.76"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 14 10:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 14 10:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 19 centroid is now closest to src. 23
[Fri Jun 14 10:18:57 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.397626 pixels away
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(30709.872000, 23921.168000, 1005.438029, 1005.438029, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (296, 218) - (411, 333)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(30709.872000, 23921.168000, 1675.730048, 3351.460096, X, Y) && !ellipse(33683.166400, 20703.640000, 1314.200038, 1314.200038, 0.000000, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(33445.650000, 22238.368000, 1552.200045, 1552.200045, 0.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(32874.906000, 22584.096000, 1586.176046, 1586.176046, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(31883.080688, 23041.039276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(26933.772000, 26732.064000, 1127.928032, 1127.928032, 0.000000, X, Y) && !ellipse(34245.084000, 20911.065800, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(27370.160126, 26239.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(33443.644140, 26240.880600, 1530.608044, 191.325606, 23.305300, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(33029.211700, 26410.393585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(30635.854126, 27795.033844, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24.gif
[Sat Jun 15 13:17:42 2013] Mean detx,y = (6018.95, 11.92) 
[Sat Jun 15 13:17:44 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:17:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:17:59 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 15 13:17:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jun 16 10:50:28 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:28 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1949.00
[Sun Jun 16 10:50:28 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1141.00
[Sun Jun 16 10:50:28 2013] Got source and background scale factors 2800614.000000, 3326704.000000
[Sun Jun 16 10:50:28 2013] User source parameters:
  Position = (353.5, 275.5) = 18 19 13.10 -14 58 23.1
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source aperture counts = 988.4 +/- 45.2
  Background aperture counts = 960.6
  Rate = 0.01 +/- 0.0006

[Sun Jun 16 10:50:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:52 2013] Using photon index=1.80, rate=0.00753, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24.arf
[Sun Jun 16 10:50:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:52 2013] Updating source flux to 1.7e-13
[Sun Jun 16 10:51:36 2013] Flag c found in src. 24 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete