[Fri Jun 14 10:15:44 2013] Detection parameters:
  Position = (348.3, 278.1) = 18 19 14.68 -14 58 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.8 +/- 23.5
  Background counts = 93.0
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 3.90'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.062
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 8.38"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src37.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src37.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src37.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Jun 14 10:16:41 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 1574.650000, observed total counts = 1253.000000
[Fri Jun 14 10:17:29 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 37 centroid is now closest to src. 24
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 24
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Fri Jun 14 10:18:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.062
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 8.38"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src37.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src37.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src37.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 3052.320000, observed total counts = 2639.000000
[Fri Jun 14 10:18:57 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:57 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.727822 pixels away
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 2608.500000, observed total counts = 2602.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 23 = 1.484702 pixels
[Fri Jun 14 10:18:57 2013] Warning, changing simple spatial fit ID from 37 to 34
[Fri Jun 14 10:18:57 2013] 2596.111000 total counts/ 615.251000 bgd. counts: snr = 79.859690
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.484702 pixels
  Position = (349.0, 279.4) = 18 19 14.46 -14 58 6.1
  Extent = 31.5 (31.5-63.0)", rotation angle = 0
  Source counts = 1980.9 +/- 51.0
  Background counts = 615.3
  Rate = 0.03 +/- 0.0007
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:18 2013] Counts = 1980.860000, rescaling region sizes by 2.000000
[Sat Jun 15 12:54:18 2013] XMMSAS src. selection expression = ellipse(30313.902000, 24261.288000, 3779.136109, 3779.136109, 0.000000, X, Y)
[Sat Jun 15 12:54:18 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23_src.reg
[Sat Jun 15 12:54:18 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (132, 62) - (566, 497)
[Sat Jun 15 12:54:18 2013] XMMSAS bgd. selection expression = annulus(30313.902000, 24261.288000, 12597.120362, 25194.240725, X, Y) && !ellipse(24619.183000, 24307.864200, 418.782412, 418.782412, 0.000000, X, Y) && !ellipse(25981.074000, 31619.382000, 407.964012, 407.964012, 0.000000, X, Y) && !ellipse(19335.457367, 28904.552002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33683.166400, 20703.640000, 1314.200038, 1314.200038, 0.000000, X, Y) && !ellipse(34454.242000, 21772.496000, 1691.496049, 351.323210, 299.359400, X, Y) && !ellipse(19419.777800, 36580.513200, 1860.648054, 294.299208, 67.470900, X, Y) && !ellipse(33577.885800, 20403.813800, 1086.288031, 1086.288031, 0.000000, X, Y) && !ellipse(19590.925613, 36141.920258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33445.650000, 22238.368000, 1552.200045, 1552.200045, 0.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(32874.906000, 22584.096000, 1586.176046, 1586.176046, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(19069.877441, 37439.820709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34484.547400, 17476.140000, 1766.240051, 1766.240051, 0.000000, X, Y) && !ellipse(32888.112823, 39186.681305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23199.836578, 30488.977905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31883.080688, 23041.039276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24018.152000, 29524.682000, 1324.408038, 1324.408038, 0.000000, X, Y) && !ellipse(30709.872000, 23921.168000, 1340.584039, 1340.584039, 0.000000, X, Y) && !ellipse(36076.083496, 16884.479019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36078.369476, 21145.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(21807.529660, 20651.818400, 308.784009, 308.784009, 0.000000, X, Y) && !ellipse(40102.411530, 20046.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.772000, 26732.064000, 1127.928032, 1127.928032, 0.000000, X, Y) && !ellipse(34245.084000, 20911.065800, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(12670.505463, 33017.869415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.876000, 28792.534000, 842.960024, 842.960024, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40765.531647, 19944.827744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(27370.160126, 26239.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(17205.732254, 26999.480865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11499.896408, 17237.420029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.215200, 15736.325200, 372.260811, 372.260811, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.790600, 27753.300600, 348.648810, 348.648810, 0.000000, X, Y) && !ellipse(26596.441400, 28635.481200, 261.964008, 261.964008, 0.000000, X, Y) && !ellipse(18155.425613, 32656.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23214.885284, 38893.218262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(38006.401306, 17699.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19525.925322, 24649.469220, 351.221610, 351.221610, 0.000000, X, Y) && !ellipse(35941.704498, 17946.851822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14835.421661, 21625.814407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.644140, 26240.880600, 1530.608044, 191.325606, 23.305300, X, Y) && !ellipse(11397.693710, 31124.408722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.123932, 19419.408066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15796.957779, 28974.530609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(38060.149719, 18293.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25338.454712, 32166.523651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33029.211700, 26410.393585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.678000, 21305.374000, 1694.416049, 1694.416049, 0.000000, X, Y) && !ellipse(30635.854126, 27795.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.698517, 29520.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37008.081085, 18220.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.392242, 30235.210205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8531.327400, 21111.840561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20756.105133, 40328.343903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.298950, 39478.362823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.776031, 19576.871216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38395.349823, 24537.798767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21392.436005, 38991.581787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21036.103195, 39725.830139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35236.703949, 22451.954651, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:18 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23.gif
[Sat Jun 15 13:33:47 2013] Mean detx,y = (5715.45, -373.92) 
[Sat Jun 15 13:33:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:43:49 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:43:49 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jun 15 13:43:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jun 16 10:50:34 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:34 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 19850.00
[Sun Jun 16 10:50:34 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 99282.00
[Sun Jun 16 10:50:34 2013] Got source and background scale factors 42757700.000000, 363459166.000000
[Sun Jun 16 10:50:34 2013] User source parameters:
  Position = (349.0, 279.4) = 18 19 14.46 -14 58 6.1
  Extent = 31.5 (31.5-63.0)", rotation angle = 0
  Source aperture counts = 8170.4 +/- 141.9
  Background aperture counts = 11679.6
  Rate = 0.1 +/- 0.002

[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.0264, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:54 2013] Updating source flux to 4.9e-13
[Sun Jun 16 10:51:36 2013] Flag p found in src. 23 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete