[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (283.5, 280.0) = 18 19 34.13 -14 58 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2574.3 +/- 61.5
  Background counts = 81.4
  Rate = 0.03 +/- 0.0008

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 1.72'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 10:16:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 2927.700000, observed total counts = 2754.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 2 = 0.072105 pixels
[Fri Jun 14 10:17:29 2013] 2923.800000 total counts/ 1247.530000 bgd. counts: snr = 47.458988
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.072105 pixels
  Position = (283.5, 280.0) = 18 19 34.11 -14 58 3.8
  Extent = 5.2 (5.0-5.5)", rotation angle = 0
  Source counts = 1676.3 +/- 54.1
  Background counts = 1247.5
  Rate = 0.02 +/- 0.0007
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 5.24"
[Fri Jun 14 10:18:02 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.034
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 10:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 2927.780000, observed total counts = 2754.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 2 = 0.000028 pixels
[Fri Jun 14 10:18:57 2013] 2923.870000 total counts/ 1247.830000 bgd. counts: snr = 47.446772
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000028 pixels
  Position = (283.5, 280.0) = 18 19 34.11 -14 58 3.8
  Extent = 5.2 (5.0-5.5)", rotation angle = 0
  Source counts = 1676.0 +/- 54.1
  Background counts = 1247.8
  Rate = 0.02 +/- 0.0007
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:15 2013] Counts = 1676.040000, rescaling region sizes by 2.000000
[Sat Jun 15 12:54:15 2013] XMMSAS src. selection expression = ellipse(24619.183000, 24307.864200, 628.173618, 628.173618, 0.000000, X, Y)
[Sat Jun 15 12:54:15 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 15 12:54:15 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (247, 244) - (320, 316)
[Sat Jun 15 12:54:16 2013] XMMSAS bgd. selection expression = annulus(24619.183000, 24307.864200, 2093.912060, 4187.824121, X, Y) && !ellipse(24018.152000, 29524.682000, 1324.408038, 1324.408038, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(21807.529660, 20651.818400, 308.784009, 308.784009, 0.000000, X, Y) && !ellipse(26933.772000, 26732.064000, 1127.928032, 1127.928032, 0.000000, X, Y) && !ellipse(24725.876000, 28792.534000, 842.960024, 842.960024, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(27370.160126, 26239.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.790600, 27753.300600, 348.648810, 348.648810, 0.000000, X, Y) && !ellipse(26596.441400, 28635.481200, 261.964008, 261.964008, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2.gif
[Sat Jun 15 12:54:27 2013] Mean detx,y = (0.63, 50.13) 
[Sat Jun 15 12:54:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 12:54:41 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 12:54:41 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 15 12:54:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 16 10:50:20 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:20 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2528.00
[Sun Jun 16 10:50:20 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 9325.00
[Sun Jun 16 10:50:20 2013] Got source and background scale factors 1149640.000000, 28930260.000000
[Sun Jun 16 10:50:20 2013] User source parameters:
  Position = (283.5, 280.0) = 18 19 34.11 -14 58 3.8
  Extent = 5.2 (5.0-5.5)", rotation angle = 0
  Source aperture counts = 2157.4 +/- 51.3
  Background aperture counts = 370.6
  Rate = 0.03 +/- 0.0007

[Sun Jun 16 10:50:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:50 2013] Using photon index=1.80, rate=0.0224, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 16 10:50:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:51 2013] Updating source flux to 4.3e-13
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete