[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (315.2, 302.2) = 18 19 24.62 -14 56 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.4 +/- 25.7
  Background counts = 100.5
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 1.24'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 7.05"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src35.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src35.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src35.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Jun 14 10:16:41 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Jun 14 10:16:41 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 35 centroid is now closest to src. 17
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 17
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun 14 10:18:02 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.05"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src35.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src35 appears to have run properly
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 35 centroid is now closest to src. 17
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(27370.160126, 26239.473419, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (278, 265) - (353, 340)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(27370.160126, 26239.473419, 1087.500000, 2175.000000, X, Y) && !ellipse(24018.152000, 29524.682000, 1324.408038, 1324.408038, 0.000000, X, Y) && !ellipse(30709.872000, 23921.168000, 1340.584039, 1340.584039, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(26933.772000, 26732.064000, 1127.928032, 1127.928032, 0.000000, X, Y) && !ellipse(24725.876000, 28792.534000, 842.960024, 842.960024, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26596.441400, 28635.481200, 261.964008, 261.964008, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19.gif
[Sat Jun 15 13:32:24 2013] Mean detx,y = (2648.80, -2095.64) 
[Sat Jun 15 13:32:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:32:33 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:32:34 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun 15 13:32:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 16 09:56:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 09:57:00 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:33 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:33 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 1097.00
[Sun Jun 16 10:50:33 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1693.00
[Sun Jun 16 10:50:33 2013] Got source and background scale factors 1332464.000000, 4478360.000000
[Sun Jun 16 10:50:33 2013] User source parameters:
  Position = (315.2, 302.2) = 18 19 24.62 -14 56 28.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 593.3 +/- 34.1
  Background aperture counts = 503.7
  Rate = 0.008 +/- 0.0005

[Sun Jun 16 10:50:33 2013] Updating counts from extracted products
[Sun Jun 16 10:50:33 2013] Set source signif. to 593.28/22.44 = 26.43
[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.00792, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:53 2013] Updating source flux to 1.4e-13
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete