[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (415.2, 194.6) = 18 18 54.56 -15 4 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.9 +/- 27.8
  Background counts = 93.6
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 11.33'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 12.09"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.139
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 12.09"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 20 centroid is now closest to src. 54
[Fri Jun 14 10:17:29 2013] Source 18 is offset by -2.936098 and 3.470747 pixels which is larger than
2 X fitted extent = 1.417352 x 1.417352, not incorporating fit results
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 12.09"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.139
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 12.09"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun 14 10:18:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 10:18:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 10:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 20 centroid is now closest to src. 50
[Fri Jun 14 10:18:57 2013] Source 18 is offset by -3.532879 and -1.128655 pixels which is larger than
2 X fitted extent = 1.481871 x 1.481871, not incorporating fit results
[Fri Jun 14 10:18:57 2013] Source 18 is offset by -1.654328 and 9.511368 pixels which is larger than
2 X fitted extent = 1.359926 x 1.359926, not incorporating fit results
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(36076.083496, 16884.479019, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (378, 157) - (453, 232)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(36076.083496, 16884.479019, 1087.500000, 2175.000000, X, Y) && !ellipse(33902.270000, 19720.274000, 873.608025, 873.608025, 0.000000, X, Y) && !ellipse(33842.077940, 19638.170902, 1753.744050, 1260.312352, 90.000000, X, Y) && !ellipse(34484.547400, 17476.140000, 1766.240051, 1766.240051, 0.000000, X, Y) && !ellipse(34306.862244, 18207.870407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34153.035156, 18811.661240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36862.073600, 20876.432800, 2589.728075, 323.716009, 18.450300, X, Y) && !ellipse(36894.209534, 16879.559250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.467865, 17644.296631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.050000, 18580.828000, 1739.088050, 1739.088050, 0.000000, X, Y) && !ellipse(34529.775848, 19285.112701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37627.816000, 17600.792000, 1984.464057, 1984.464057, 0.000000, X, Y) && !ellipse(38006.401306, 17699.136261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35941.704498, 17946.851822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36527.324310, 17889.987732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.123932, 19419.408066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35291.264801, 16958.349899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38060.149719, 18293.472534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37008.081085, 18220.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36894.222809, 19327.360855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.776031, 19576.871216, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18.gif
[Sat Jun 15 13:18:05 2013] Mean detx,y = (11874.46, 6850.82) 
[Sat Jun 15 13:18:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:18:22 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:18:22 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jun 15 13:18:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jun 15 14:51:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 14:51:19 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:28 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:28 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 1143.00
[Sun Jun 16 10:50:28 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 766.00
[Sun Jun 16 10:50:28 2013] Got source and background scale factors 1082172.000000, 2553585.000000
[Sun Jun 16 10:50:28 2013] User source parameters:
  Position = (415.2, 194.6) = 18 18 54.56 -15 4 14.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 818.4 +/- 34.8
  Background aperture counts = 324.6
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 10:50:28 2013] Updating counts from extracted products
[Sun Jun 16 10:50:28 2013] Set source signif. to 818.38/18.02 = 45.42
[Sun Jun 16 10:50:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:52 2013] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18.arf
[Sun Jun 16 10:50:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:52 2013] Updating source flux to 5.5e-13
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete