[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (310.2, 307.0) = 18 19 26.11 -14 56 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.2 +/- 26.7
  Background counts = 101.6
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 1.05'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 6.96"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 6.96"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src27.csv
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun 14 10:16:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src27.csv
[Fri Jun 14 10:16:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 1601.520000, observed total counts = 1606.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 17 = 6.998415 pixels
[Fri Jun 14 10:17:29 2013] 1647.496000 total counts/ 1239.130000 bgd. counts: snr = 11.600885
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 6.998415 pixels
  Position = (305.1, 311.7) = 18 19 27.65 -14 55 45.5
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 408.4 +/- 40.6
  Background counts = 1239.1
  Rate = 0.005 +/- 0.0005
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 1550.540000, observed total counts = 1553.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 17 = 6.449766 pixels
[Fri Jun 14 10:17:29 2013] Warning, changing simple spatial fit ID from 27 to 35
[Fri Jun 14 10:17:29 2013] 1592.059000 total counts/ 1113.170000 bgd. counts: snr = 14.353378
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 6.449766 pixels
  Position = (310.1, 307.8) = 18 19 26.13 -14 56 2.8
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 478.9 +/- 39.9
  Background counts = 1113.2
  Rate = 0.006 +/- 0.0005
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 19
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 14.10"
[Fri Jun 14 10:18:02 2013] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.143
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 14.10"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src27 appears to have run properly
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.096414 pixels away
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 1554.240000, observed total counts = 1553.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 17 = 0.061947 pixels
[Fri Jun 14 10:18:57 2013] Warning, changing simple spatial fit ID from 27 to 35
[Fri Jun 14 10:18:57 2013] 1595.384000 total counts/ 1108.870000 bgd. counts: snr = 14.610162
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.061947 pixels
  Position = (310.1, 307.8) = 18 19 26.13 -14 56 2.6
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 486.5 +/- 39.9
  Background counts = 1108.9
  Rate = 0.006 +/- 0.0005
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(26933.772000, 26732.064000, 845.946024, 845.946024, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (262, 259) - (359, 356)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(26933.772000, 26732.064000, 1409.910041, 2819.820081, X, Y) && !ellipse(24619.183000, 24307.864200, 418.782412, 418.782412, 0.000000, X, Y) && !ellipse(24018.152000, 29524.682000, 1324.408038, 1324.408038, 0.000000, X, Y) && !ellipse(30709.872000, 23921.168000, 1340.584039, 1340.584039, 0.000000, X, Y) && !ellipse(29228.138000, 24891.244000, 1294.864037, 1294.864037, 0.000000, X, Y) && !ellipse(24725.876000, 28792.534000, 842.960024, 842.960024, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(29638.222000, 24632.840000, 1259.712036, 1259.712036, 0.000000, X, Y) && !ellipse(27370.160126, 26239.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30313.902000, 24261.288000, 2519.424072, 2519.424072, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26596.441400, 28635.481200, 261.964008, 261.964008, 0.000000, X, Y) && !ellipse(32431.890000, 23077.178000, 3104.400089, 3104.400089, 0.000000, X, Y) && !ellipse(24852.698517, 29520.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.392242, 30235.210205, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17.gif
[Sat Jun 15 13:19:55 2013] Mean detx,y = (2215.37, -2535.68) 
[Sat Jun 15 13:19:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:20:07 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:20:07 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun 15 13:20:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 16 10:50:30 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:30 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1752.00
[Sun Jun 16 10:50:30 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 3919.00
[Sun Jun 16 10:50:30 2013] Got source and background scale factors 2244760.000000, 10280512.000000
[Sun Jun 16 10:50:30 2013] User source parameters:
  Position = (310.1, 307.8) = 18 19 26.13 -14 56 2.6
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source aperture counts = 896.3 +/- 42.9
  Background aperture counts = 855.7
  Rate = 0.01 +/- 0.0006

[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.00649, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:53 2013] Updating source flux to 1.1e-13
[Sun Jun 16 10:51:36 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete