[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (222.8, 332.8) = 18 19 52.34 -14 54 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 862.5 +/- 37.5
  Background counts = 76.7
  Rate = 0.01 +/- 0.0006

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 6.02'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 9.44"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.877
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.44"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 10:16:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 14 10:17:29 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.028110 pixels away
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 9.44"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.877
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.44"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 10:18:03 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 10:18:04 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 14 10:18:57 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.028110 pixels away
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:16 2013] XMMSAS src. selection expression = ellipse(19335.457367, 28904.552002, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun 15 12:54:16 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (185, 295) - (260, 370)
[Sat Jun 15 12:54:16 2013] XMMSAS bgd. selection expression = annulus(19335.457367, 28904.552002, 1087.500000, 2175.000000, X, Y) && !ellipse(17205.732254, 26999.480865, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14.gif
[Sat Jun 15 12:55:11 2013] Mean detx,y = (-5541.32, -4228.10) 
[Sat Jun 15 12:55:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 12:55:30 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 12:55:30 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun 15 12:55:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun 15 14:10:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 14:10:26 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:21 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:21 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 1139.00
[Sun Jun 16 10:50:22 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 3371.00
[Sun Jun 16 10:50:22 2013] Got source and background scale factors 1342400.000000, 10801262.000000
[Sun Jun 16 10:50:22 2013] User source parameters:
  Position = (222.8, 332.8) = 18 19 52.34 -14 54 13.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 720.0 +/- 34.8
  Background aperture counts = 419.0
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 10:50:22 2013] Updating counts from extracted products
[Sun Jun 16 10:50:22 2013] Set source signif. to 720.05/20.47 = 35.18
[Sun Jun 16 10:50:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:51 2013] Using photon index=1.80, rate=0.00961, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14.arf
[Sun Jun 16 10:50:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:51 2013] Updating source flux to 2.2e-13
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete