[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (284.6, 331.0) = 18 19 33.80 -14 54 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.4 +/- 24.5
  Background counts = 99.1
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 2.57'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Fri Jun 14 10:16:38 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.71"
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun 14 10:16:39 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun 14 10:16:39 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src30 appears to have run properly
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun 14 10:16:40 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 30 centroid is now closest to src. 12
[Fri Jun 14 10:17:29 2013] Spatial fit model total counts = 1469.000000, observed total counts = 1469.000000
[Fri Jun 14 10:17:29 2013] Offset between fit and detection position for source 13 = 3.738135 pixels
[Fri Jun 14 10:17:29 2013] Warning, changing simple spatial fit ID from 30 to 42
[Fri Jun 14 10:17:29 2013] 1502.013000 total counts/ 1034.480000 bgd. counts: snr = 14.536211
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.738135 pixels
  Position = (287.5, 328.7) = 18 19 32.91 -14 54 31.6
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 467.5 +/- 38.8
  Background counts = 1034.5
  Rate = 0.006 +/- 0.0005
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:30 2013] Source is confused with source 15
[Fri Jun 14 10:18:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 14.62"
[Fri Jun 14 10:18:02 2013] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.939
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 14.62"
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 14 10:18:04 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jun 14 10:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 14 10:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jun 14 10:18:05 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Jun 14 10:18:57 2013] Spatial fit model total counts = 2172.190000, observed total counts = 2071.000000
[Fri Jun 14 10:18:57 2013] Offset between fit and detection position for source 13 = 3.911230 pixels
[Fri Jun 14 10:18:57 2013] 2209.726000 total counts/ 1880.180000 bgd. counts: snr = 7.600048
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.911230 pixels
  Position = (284.8, 331.5) = 18 19 33.74 -14 54 19.5
  Extent = 10.5 (8.5-12.7)", rotation angle = 0
  Source counts = 329.5 +/- 47.0
  Background counts = 1880.2
  Rate = 0.004 +/- 0.0006
[Fri Jun 14 10:18:57 2013] Source 13 is offset by 2.942092 and -2.149310 pixels which is larger than
2 X fitted extent = 2.184262 x 0.918933, not incorporating fit results
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:17 2013] XMMSAS src. selection expression = ellipse(24725.876000, 28792.534000, 632.220018, 632.220018, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 15 12:54:17 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (248, 295) - (321, 368)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(24725.876000, 28792.534000, 1053.700030, 2107.400061, X, Y) && !ellipse(23199.836578, 30488.977905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24018.152000, 29524.682000, 1324.408038, 1324.408038, 0.000000, X, Y) && !ellipse(26933.772000, 26732.064000, 1127.928032, 1127.928032, 0.000000, X, Y) && !ellipse(29093.732000, 25035.810000, 2341.984067, 2341.984067, 0.000000, X, Y) && !ellipse(27370.160126, 26239.473419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23467.790600, 27753.300600, 348.648810, 348.648810, 0.000000, X, Y) && !ellipse(26596.441400, 28635.481200, 261.964008, 261.964008, 0.000000, X, Y) && !ellipse(24852.698517, 29520.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.392242, 30235.210205, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13.gif
[Sat Jun 15 13:21:05 2013] Mean detx,y = (-93.48, -4434.48) 
[Sat Jun 15 13:21:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:21:15 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:21:15 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 15 13:21:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 16 10:50:31 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:31 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 986.00
[Sun Jun 16 10:50:31 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1867.00
[Sun Jun 16 10:50:31 2013] Got source and background scale factors 1138940.000000, 4737008.000000
[Sun Jun 16 10:50:31 2013] User source parameters:
  Position = (284.8, 331.5) = 18 19 33.74 -14 54 19.5
  Extent = 10.5 (8.5-12.7)", rotation angle = 0
  Source aperture counts = 537.1 +/- 32.4
  Background aperture counts = 448.9
  Rate = 0.007 +/- 0.0004

[Sun Jun 16 10:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:53 2013] Using photon index=1.80, rate=0.0044, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13.arf
[Sun Jun 16 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:53 2013] Updating source flux to 8e-14
[Sun Jun 16 10:51:36 2013] Flag b found in src. 13 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] Flag c found in src. 13 procflags, skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete