[Fri Jun 14 10:15:43 2013] Detection parameters:
  Position = (267.2, 351.0) = 18 19 39.01 -14 52 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.3 +/- 26.4
  Background counts = 86.3
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:46 2013] Off-axis axis estimate = 4.43'
[Fri Jun 14 10:16:38 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:38 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Fri Jun 14 10:16:38 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.808
[Fri Jun 14 10:16:38 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.64"
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src16.csv
[Fri Jun 14 10:16:38 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jun 14 10:16:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src16.csv
[Fri Jun 14 10:16:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jun 14 10:16:40 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jun 14 10:16:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri Jun 14 10:16:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:29 2013] Warning, spatial fit 16 centroid is now closest to src. 12
[Fri Jun 14 10:17:29 2013] Source 11 is offset by -1.653755 and 2.431258 pixels which is larger than
2 X fitted extent = 7.611540 x 1.235862, not incorporating fit results
[Fri Jun 14 10:17:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:30 2013] Assessing source extent using major
[Fri Jun 14 10:17:30 2013] Source does appear to be extended
[Fri Jun 14 10:17:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:02 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:18:02 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Fri Jun 14 10:18:02 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.808
[Fri Jun 14 10:18:02 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.64"
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jun 14 10:18:03 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jun 14 10:18:03 2013] Fit fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_src16 appears to have run properly
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Jun 14 10:18:05 2013] fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jun 14 10:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Jun 14 10:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:57 2013] Warning, spatial fit 16 centroid is now closest to src. 12
[Fri Jun 14 10:18:57 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:57 2013] Assessing source extent using major
[Fri Jun 14 10:18:57 2013] Source does appear to be extended
[Fri Jun 14 10:18:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 12:54:16 2013] XMMSAS src. selection expression = ellipse(23199.836578, 30488.977905, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 12:54:16 2013] Writing source region out to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 15 12:54:16 2013] Extracting stamp from image fullrun_mos2_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (230, 314) - (305, 389)
[Sat Jun 15 12:54:17 2013] XMMSAS bgd. selection expression = annulus(23199.836578, 30488.977905, 1087.500000, 2175.000000, X, Y) && !ellipse(24018.152000, 29524.682000, 1324.408038, 1324.408038, 0.000000, X, Y) && !ellipse(24725.876000, 28792.534000, 842.960024, 842.960024, 0.000000, X, Y) && !ellipse(25434.285339, 27981.233704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25338.454712, 32166.523651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24852.698517, 29520.861298, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 12:54:17 2013] Writing fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11.gif
[Sat Jun 15 13:11:16 2013] Mean detx,y = (-1765.09, -6041.38) 
[Sat Jun 15 13:11:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 13:11:36 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 13:11:36 2013] Setting source spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 15 13:11:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 15 14:42:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 14:42:51 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:27 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:27 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 1111.00
[Sun Jun 16 10:50:27 2013] Total counts from fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 2276.00
[Sun Jun 16 10:50:27 2013] Got source and background scale factors 1283288.000000, 6838316.000000
[Sun Jun 16 10:50:27 2013] User source parameters:
  Position = (267.2, 351.0) = 18 19 39.01 -14 52 55.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 683.9 +/- 34.3
  Background aperture counts = 427.1
  Rate = 0.009 +/- 0.0005

[Sun Jun 16 10:50:27 2013] Updating counts from extracted products
[Sun Jun 16 10:50:27 2013] Set source signif. to 683.88/20.67 = 33.09
[Sun Jun 16 10:50:52 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:52 2013] Using photon index=1.80, rate=0.00913, arf fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11.arf
[Sun Jun 16 10:50:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:52 2013] Updating source flux to 2e-13
[Sun Jun 16 10:51:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:52:29 2013] xmm0505240101/analysis//spectral/fullrun_mos2_xmm0505240101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete