[Fri Jun 14 10:15:40 2013] Detection parameters:
  Position = (397.1, 206.0) = 18 18 60.00 -15 3 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 446.3 +/- 32.4
  Background counts = 124.1
  Rate = 0.006 +/- 0.0004

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 9.80'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 11.33"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.33"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src8.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src8.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 14 10:16:36 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning, spatial fit 8 centroid is now closest to src. 22
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 3154.420000, observed total counts = 3146.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 7 = 3.767060 pixels
[Fri Jun 14 10:17:16 2013] Warning, changing simple spatial fit ID from 8 to 11
[Fri Jun 14 10:17:16 2013] 3214.319000 total counts/ 2375.630000 bgd. counts: snr = 17.207253
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.767060 pixels
  Position = (396.7, 209.7) = 18 19 0.13 -15 3 9.1
  Extent = 22.0 (21.9-44.0)", rotation angle = 0
  Source counts = 838.7 +/- 56.7
  Background counts = 2375.6
  Rate = 0.01 +/- 0.0008
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 6
[Fri Jun 14 10:17:17 2013] Source is confused with source 22
[Fri Jun 14 10:17:17 2013] Source is confused with source 25
[Fri Jun 14 10:17:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 22.02"
[Fri Jun 14 10:17:59 2013] source mask rpix=5.1, npix_max = 123, mask sum = 121, frac = 0.978
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 22.02"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 14 10:18:00 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jun 14 10:18:41 2013] Warning, spatial fit 8 centroid is now closest to src. 6
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 2856.350000, observed total counts = 2854.000000
[Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 7 = 5.133068 pixels
[Fri Jun 14 10:18:41 2013] Warning, changing simple spatial fit ID from 8 to 24
[Fri Jun 14 10:18:41 2013] 2813.735000 total counts/ 1866.070000 bgd. counts: snr = 21.937689
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 5.133068 pixels
  Position = (401.8, 210.7) = 18 18 58.61 -15 3 4.9
  Extent = 23.4 (23.4-46.8)", rotation angle = 0
  Source counts = 947.7 +/- 53.0
  Background counts = 1866.1
  Rate = 0.01 +/- 0.0007
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:06 2013] XMMSAS src. selection expression = ellipse(34904.026000, 18282.316000, 1404.474040, 1404.474040, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7_src.reg
[Sat Jun 15 10:27:06 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (321, 130) - (482, 291)
[Sat Jun 15 10:27:06 2013] XMMSAS bgd. selection expression = annulus(34904.026000, 18282.316000, 2340.790067, 4681.580135, X, Y) && !ellipse(33527.820600, 20423.556200, 940.272027, 940.272027, 0.000000, X, Y) && !ellipse(36094.620000, 17087.322000, 820.712024, 820.712024, 0.000000, X, Y) && !ellipse(39701.887400, 18326.916000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(38914.936000, 18484.726000, 681.368820, 681.368820, 0.000000, X, Y) && !ellipse(33727.158000, 20315.404000, 1366.096039, 1366.096039, 0.000000, X, Y) && !ellipse(31599.894000, 21328.199200, 1369.144039, 1369.144039, 0.000000, X, Y) && !ellipse(36854.453125, 16920.367050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30553.330505, 22067.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31571.070000, 21334.994000, 1547.952045, 1547.952045, 0.000000, X, Y) && !ellipse(35615.658936, 17778.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34620.986725, 20830.731369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.841766, 17264.466812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37756.829962, 17677.270416, 847.784024, 682.846811, 90.000000, X, Y) && !ellipse(36488.643188, 19185.692474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34752.086761, 22141.498093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.921295, 19272.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36622.369049, 17695.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38294.859619, 17959.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37891.143829, 18035.030655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35296.951874, 23275.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38704.108490, 19546.060928, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7.gif
[Sat Jun 15 10:31:40 2013] Mean detx,y = (5761.54, -10627.01) 
[Sat Jun 15 10:31:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:32:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:32:14 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jun 15 10:32:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 16 10:49:59 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:59 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 7886.00
[Sun Jun 16 10:49:59 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 9780.00
[Sun Jun 16 10:49:59 2013] Got source and background scale factors 6200780.000000, 26137660.000000
[Sun Jun 16 10:49:59 2013] User source parameters:
  Position = (401.8, 210.7) = 18 18 58.61 -15 3 4.9
  Extent = 23.4 (23.4-46.8)", rotation angle = 0
  Source aperture counts = 5565.8 +/- 89.8
  Background aperture counts = 2320.2
  Rate = 0.07 +/- 0.001

[Sun Jun 16 10:50:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:16 2013] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7.arf
[Sun Jun 16 10:50:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:16 2013] Updating source flux to 4.2e-13
[Sun Jun 16 10:51:02 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete