[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (291.2, 182.5) = 18 19 31.80 -15 5 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.3 +/- 16.7
  Background counts = 83.7
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 8.42'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.864
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 10.64"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src51.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src51.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src51.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 14.028409 pixels away
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 44
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.864
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 10.64"
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src49.csv
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src49.csv
[Fri Jun 14 10:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jun 14 10:18:02 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 1240.500000, observed total counts = 1239.000000
[Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 61 = 5.790152 pixels
[Fri Jun 14 10:18:41 2013] 1234.075000 total counts/ 867.888000 bgd. counts: snr = 12.429999
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 5.790152 pixels
  Position = (297.0, 181.6) = 18 19 30.08 -15 5 11.5
  Extent = 21.3 (21.2-42.6)", rotation angle = 0
  Source counts = 366.2 +/- 35.1
  Background counts = 867.9
  Rate = 0.005 +/- 0.0005
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:08 2013] XMMSAS src. selection expression = ellipse(25787.068000, 15752.812600, 1276.710037, 1276.710037, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61_src.reg
[Sat Jun 15 10:27:08 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (224, 108) - (370, 255)
[Sat Jun 15 10:27:08 2013] XMMSAS bgd. selection expression = annulus(25787.068000, 15752.812600, 2127.850061, 4255.700122, X, Y) && !ellipse(31571.070000, 21334.994000, 1547.952045, 1547.952045, 0.000000, X, Y) && !ellipse(25896.063680, 15731.510000, 423.435212, 423.435212, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61.gif
[Sat Jun 15 10:55:24 2013] Mean detx,y = (8739.47, -1746.14) 
[Sat Jun 15 10:55:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:56:16 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:56:16 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jun 15 10:56:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sun Jun 16 10:50:12 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:12 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 2021.00
[Sun Jun 16 10:50:12 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 14372.00
[Sun Jun 16 10:50:12 2013] Got source and background scale factors 4932276.000000, 40472145.000000
[Sun Jun 16 10:50:12 2013] User source parameters:
  Position = (297.0, 181.6) = 18 19 30.08 -15 5 11.5
  Extent = 21.3 (21.2-42.6)", rotation angle = 0
  Source aperture counts = 269.5 +/- 46.0
  Background aperture counts = 1751.5
  Rate = 0.004 +/- 0.0006

[Sun Jun 16 10:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:19 2013] Using photon index=1.80, rate=0.0049, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61.arf
[Sun Jun 16 10:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:19 2013] Updating source flux to 1.2e-13
[Sun Jun 16 10:51:02 2013] Flag c found in src. 61 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete