[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (158.1, 178.4) = 18 20 11.79 -15 5 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.1 +/- 17.1
  Background counts = 82.5
  Rate = 0.001 +/- 0.0002

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 13.39'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 13.12"
[Fri Jun 14 10:16:34 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 13.12"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src61.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src61.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src61.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:38 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Jun 14 10:16:38 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Jun 14 10:16:38 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 13.237221 pixels away
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 13.12"
[Fri Jun 14 10:17:59 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 13.12"
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src59.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src59.csv
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src59.csv
[Fri Jun 14 10:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Jun 14 10:18:02 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Fri Jun 14 10:18:41 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 16.733363 pixels away
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:08 2013] XMMSAS src. selection expression = ellipse(13707.497513, 15473.062790, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58_src.reg
[Sat Jun 15 10:27:08 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (121, 141) - (196, 216)
[Sat Jun 15 10:27:08 2013] XMMSAS bgd. selection expression = annulus(13707.497513, 15473.062790, 1087.500000, 2175.000000, X, Y) && !ellipse(11516.636540, 17261.331920, 349.940810, 349.940810, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58.gif
[Sat Jun 15 10:58:50 2013] Mean detx,y = (9670.09, 10283.80) 
[Sat Jun 15 10:58:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:58:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:58:59 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jun 15 10:58:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Jun 15 12:54:00 2013] Not generating rmf since there are only 80 counts
[Sat Jun 15 12:54:00 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:15 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:15 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 537.00
[Sun Jun 16 10:50:15 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58_bgd.pi.gz = 3416.00
[Sun Jun 16 10:50:15 2013] Got source and background scale factors 1345600.000000, 10766292.000000
[Sun Jun 16 10:50:15 2013] User source parameters:
  Position = (158.1, 178.4) = 18 20 11.79 -15 5 24.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 110.1 +/- 24.2
  Background aperture counts = 426.9
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 10:50:15 2013] Updating counts from extracted products
[Sun Jun 16 10:50:15 2013] Set source signif. to 110.06/20.66 = 5.33
[Sun Jun 16 10:50:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:20 2013] Using photon index=1.80, rate=0.00147, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58.arf
[Sun Jun 16 10:50:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:20 2013] Updating source flux to 5.4e-14
[Sun Jun 16 10:51:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete