[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (406.3, 268.1) = 18 18 57.27 -14 58 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 16.7
  Background counts = 84.1
  Rate = 0.001 +/- 0.0002

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 8.12'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 10.49"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src57.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src57.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src57_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src57.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 12.812650 pixels away
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 10.49"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 10.49"
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src55.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src55.csv
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src55.csv
[Fri Jun 14 10:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Jun 14 10:18:02 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Jun 14 10:18:41 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 12.812650 pixels away
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:08 2013] XMMSAS src. selection expression = ellipse(35296.951874, 23275.082764, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56_src.reg
[Sat Jun 15 10:27:08 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (369, 231) - (444, 306)
[Sat Jun 15 10:27:08 2013] XMMSAS bgd. selection expression = annulus(35296.951874, 23275.082764, 1087.500000, 2175.000000, X, Y) && !ellipse(33527.820600, 20423.556200, 940.272027, 940.272027, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(33727.158000, 20315.404000, 1366.096039, 1366.096039, 0.000000, X, Y) && !ellipse(34620.986725, 20830.731369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34752.086761, 22141.498093, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56.gif
[Sat Jun 15 10:57:55 2013] Mean detx,y = (806.30, -10885.38) 
[Sat Jun 15 10:57:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:58:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:58:15 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Jun 15 10:58:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat Jun 15 12:53:39 2013] Not generating rmf since there are only 89 counts
[Sat Jun 15 12:53:39 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:14 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:14 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 561.00
[Sun Jun 16 10:50:14 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 3022.00
[Sun Jun 16 10:50:14 2013] Got source and background scale factors 1327290.000000, 8415992.000000
[Sun Jun 16 10:50:14 2013] User source parameters:
  Position = (406.3, 268.1) = 18 18 57.27 -14 58 53.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 84.4 +/- 24.7
  Background aperture counts = 476.6
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 10:50:14 2013] Updating counts from extracted products
[Sun Jun 16 10:50:14 2013] Set source signif. to 84.40/21.83 = 3.87
[Sun Jun 16 10:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:19 2013] Using photon index=1.80, rate=0.00113, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56.arf
[Sun Jun 16 10:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:19 2013] Updating source flux to 3.9e-14
[Sun Jun 16 10:51:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete