[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (312.0, 282.0) = 18 19 25.56 -14 57 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.9 +/- 22.5
  Background counts = 103.3
  Rate = 0.003 +/- 0.0003

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 1.55'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 7.20"
[Fri Jun 14 10:16:34 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 7.20"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src37.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src37.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src37.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 1345.950000, observed total counts = 1342.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 53 = 0.497939 pixels
[Fri Jun 14 10:17:16 2013] 1323.102600 total counts/ 1267.030000 bgd. counts: snr = 1.575278
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.497939 pixels
  Position = (312.4, 281.6) = 18 19 25.46 -14 57 56.6
  Extent = 2.3 (1.8-3.5)", rotation angle = 0
  Source counts = 56.1 +/- 36.4
  Background counts = 1267.0
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability