[Fri Jun 14 10:15:40 2013] Detection parameters:
  Position = (283.5, 280.1) = 18 19 34.12 -14 58 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2517.9 +/- 62.3
  Background counts = 111.6
  Rate = 0.03 +/- 0.0008

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 1.72'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 14 10:16:34 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 10:16:36 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 2985.000000, observed total counts = 2985.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 5 = 0.056030 pixels
[Fri Jun 14 10:17:16 2013] 2988.010000 total counts/ 1403.270000 bgd. counts: snr = 42.304581
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.056030 pixels
  Position = (283.5, 280.1) = 18 19 34.11 -14 58 3.2
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1584.7 +/- 54.7
  Background counts = 1403.3
  Rate = 0.02 +/- 0.0007
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 5.41"
[Fri Jun 14 10:17:59 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.988
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 2985.000000, observed total counts = 2985.000000
[Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 5 = 0.000000 pixels
[Fri Jun 14 10:18:41 2013] 2988.020000 total counts/ 1403.270000 bgd. counts: snr = 42.304848
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000000 pixels
  Position = (283.5, 280.1) = 18 19 34.11 -14 58 3.2
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source counts = 1584.8 +/- 54.7
  Background counts = 1403.3
  Rate = 0.02 +/- 0.0007
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:06 2013] Counts = 1584.750000, rescaling region sizes by 2.000000
[Sat Jun 15 10:27:06 2013] XMMSAS src. selection expression = ellipse(24618.594600, 24320.221400, 648.697219, 648.697219, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 15 10:27:06 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (246, 243) - (321, 317)
[Sat Jun 15 10:27:06 2013] XMMSAS bgd. selection expression = annulus(24618.594600, 24320.221400, 2162.324062, 4324.648124, X, Y) && !ellipse(23540.068660, 27811.105600, 511.448815, 511.448815, 0.000000, X, Y) && !ellipse(22516.872772, 29178.065155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.012000, 29682.340000, 1342.640039, 1342.640039, 0.000000, X, Y) && !ellipse(22785.440000, 28753.208000, 1342.648039, 1342.648039, 0.000000, X, Y) && !ellipse(24623.680654, 26739.507474, 1133.168033, 199.880936, 45.786997, X, Y) && !ellipse(29127.940000, 22955.644000, 807.120023, 807.120023, 0.000000, X, Y) && !ellipse(28624.652000, 23295.056000, 1246.032036, 1246.032036, 0.000000, X, Y) && !ellipse(26925.924000, 24602.500000, 1104.176032, 1104.176032, 0.000000, X, Y) && !ellipse(26609.393400, 28655.110600, 246.927645, 246.927645, 0.000000, X, Y) && !ellipse(24972.357595, 26388.699069, 1369.136039, 204.820612, 224.908842, X, Y) && !ellipse(27942.271000, 23832.117400, 1369.136039, 171.141605, 215.877000, X, Y) && !ellipse(26154.302000, 25270.672000, 1051.272030, 1051.272030, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5.gif
[Sat Jun 15 10:27:17 2013] Mean detx,y = (257.27, -156.66) 
[Sat Jun 15 10:27:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:27:34 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:27:34 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 15 10:27:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 16 10:49:57 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:57 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 2616.00
[Sun Jun 16 10:49:57 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 14926.00
[Sun Jun 16 10:49:57 2013] Got source and background scale factors 1331200.000000, 34428264.000000
[Sun Jun 16 10:49:57 2013] User source parameters:
  Position = (283.5, 280.1) = 18 19 34.11 -14 58 3.2
  Extent = 5.4 (5.1-5.6)", rotation angle = 0
  Source aperture counts = 2038.9 +/- 52.2
  Background aperture counts = 577.1
  Rate = 0.03 +/- 0.0007

[Sun Jun 16 10:50:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:16 2013] Using photon index=1.80, rate=0.0212, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5.arf
[Sun Jun 16 10:50:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:16 2013] Updating source flux to 3.6e-13
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete