[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (291.8, 353.8) = 18 19 31.63 -14 52 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.0 +/- 17.5
  Background counts = 81.0
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 4.04'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Fri Jun 14 10:16:34 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 8.45"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src40.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src40.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src40.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri Jun 14 10:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Jun 14 10:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri Jun 14 10:16:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 792.628000, observed total counts = 552.000000
[Fri Jun 14 10:17:16 2013] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Fri Jun 14 10:17:59 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 8.45"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src39.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src39.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src39.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Jun 14 10:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Jun 14 10:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri Jun 14 10:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:41 2013] Source 49 is offset by 4.918319 and 7.583936 pixels which is larger than
2 X fitted extent = 0.977274 x 0.977274, not incorporating fit results
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:07 2013] XMMSAS src. selection expression = ellipse(25339.431763, 30733.280426, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49_src.reg
[Sat Jun 15 10:27:07 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (254, 316) - (329, 391)
[Sat Jun 15 10:27:07 2013] XMMSAS bgd. selection expression = annulus(25339.431763, 30733.280426, 1087.500000, 2175.000000, X, Y) && !ellipse(22516.872772, 29178.065155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.012000, 29682.340000, 1342.640039, 1342.640039, 0.000000, X, Y) && !ellipse(22785.440000, 28753.208000, 1342.648039, 1342.648039, 0.000000, X, Y) && !ellipse(26609.393400, 28655.110600, 246.927645, 246.927645, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49.gif
[Sat Jun 15 10:52:43 2013] Mean detx,y = (-6105.82, -533.83) 
[Sat Jun 15 10:52:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:53:02 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:53:02 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Jun 15 10:53:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Jun 15 12:43:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 12:43:00 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:09 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:09 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 453.00
[Sun Jun 16 10:50:09 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49_bgd.pi.gz = 1922.00
[Sun Jun 16 10:50:09 2013] Got source and background scale factors 1024692.000000, 5672185.000000
[Sun Jun 16 10:50:09 2013] User source parameters:
  Position = (291.8, 353.8) = 18 19 31.63 -14 52 41.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 105.8 +/- 22.3
  Background aperture counts = 347.2
  Rate = 0.001 +/- 0.0003

[Sun Jun 16 10:50:09 2013] Updating counts from extracted products
[Sun Jun 16 10:50:09 2013] Set source signif. to 105.79/18.63 = 5.68
[Sun Jun 16 10:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:19 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49.arf
[Sun Jun 16 10:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:19 2013] Updating source flux to 3.4e-14
[Sun Jun 16 10:51:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete