[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (436.1, 207.9) = 18 18 48.30 -15 3 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.7 +/- 21.6
  Background counts = 115.0
  Rate = 0.001 +/- 0.0003

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 11.95'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 12.40"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.801
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 12.40"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src55.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src55.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src55.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning, spatial fit 55 centroid is now closest to src. 23
[Fri Jun 14 10:17:16 2013] Source 46 is offset by 2.973124 and -6.258061 pixels which is larger than
2 X fitted extent = 11.385288 x 1.423159, not incorporating fit results
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 20
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 12.40"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.801
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 12.40"
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src53.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src53 appears to have run properly
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Jun 14 10:18:02 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Jun 14 10:18:41 2013] Warning, spatial fit 53 centroid is now closest to src. 23
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:08 2013] XMMSAS src. selection expression = ellipse(37891.143829, 18035.030655, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46_src.reg
[Sat Jun 15 10:27:08 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (399, 170) - (474, 245)
[Sat Jun 15 10:27:08 2013] XMMSAS bgd. selection expression = annulus(37891.143829, 18035.030655, 1087.500000, 2175.000000, X, Y) && !ellipse(36094.620000, 17087.322000, 820.712024, 820.712024, 0.000000, X, Y) && !ellipse(39701.887400, 18326.916000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(34904.026000, 18282.316000, 1872.632054, 1872.632054, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(38914.936000, 18484.726000, 681.368820, 681.368820, 0.000000, X, Y) && !ellipse(36854.453125, 16920.367050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35615.658936, 17778.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.841766, 17264.466812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37756.829962, 17677.270416, 847.784024, 682.846811, 90.000000, X, Y) && !ellipse(36488.643188, 19185.692474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.921295, 19272.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36622.369049, 17695.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38294.859619, 17959.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38704.108490, 19546.060928, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46.gif
[Sat Jun 15 10:57:38 2013] Mean detx,y = (5898.38, -13730.61) 
[Sat Jun 15 10:57:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:57:48 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:57:48 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Jun 15 10:57:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Jun 15 12:53:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 12:53:33 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:14 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:14 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 1164.00
[Sun Jun 16 10:50:14 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46_bgd.pi.gz = 837.00
[Sun Jun 16 10:50:14 2013] Got source and background scale factors 1348800.000000, 2577260.000000
[Sun Jun 16 10:50:14 2013] User source parameters:
  Position = (436.1, 207.9) = 18 18 48.30 -15 3 14.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 726.0 +/- 35.1
  Background aperture counts = 438.0
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 10:50:14 2013] Updating counts from extracted products
[Sun Jun 16 10:50:14 2013] Set source signif. to 725.96/20.93 = 34.69
[Sun Jun 16 10:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:19 2013] Using photon index=1.80, rate=0.00971, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46.arf
[Sun Jun 16 10:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:19 2013] Updating source flux to 4.9e-13
[Sun Jun 16 10:51:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete