[Fri Jun 14 10:15:42 2013] Detection parameters: Position = (368.9, 243.2) = 18 19 8.47 -15 0 43.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 238.1 +/- 24.3 Background counts = 108.9 Rate = 0.005 +/- 0.0005 [Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 6.49' [Fri Jun 14 10:16:34 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting [Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 9.67" [Fri Jun 14 10:16:34 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.213 [Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.67" [Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src15.ximg exists [Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src15.csv [Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src15_1.ximg exists [Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src15.csv [Fri Jun 14 10:16:35 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Fri Jun 14 10:17:16 2013] Warning, spatial fit 15 centroid is now closest to src. 42 [Fri Jun 14 10:17:16 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 16.454437 pixels away [Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 10:17:17 2013] Assessing source extent using major [Fri Jun 14 10:17:17 2013] Source does appear to be extended [Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 14 10:17:17 2013] Source is confused with source 42 [Fri Jun 14 10:17:59 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting [Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 9.67" [Fri Jun 14 10:17:59 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.213 [Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.67" [Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src15.ximg exists [Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src15.csv [Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src15_1.ximg exists [Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src15.csv [Fri Jun 14 10:18:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 1421.700000, observed total counts = 1432.000000 [Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 43 = 5.727362 pixels [Fri Jun 14 10:18:41 2013] 1445.380000 total counts/ 756.672000 bgd. counts: snr = 25.036943 Spatial fit parameters: Offset between fit and detection position for source 43 = 5.727362 pixels Position = (363.8, 245.7) = 18 19 10.02 -15 0 32.7 Extent = 17.1 (13.7-19.3)", rotation angle = 0 Source counts = 688.7 +/- 38.0 Background counts = 756.7 Rate = 0.009 +/- 0.0005 [Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound [Fri Jun 14 10:18:41 2013] Source does appear to be extended [Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 10:27:07 2013] XMMSAS src. selection expression = ellipse(31599.894000, 21328.199200, 1026.858030, 1026.858030, 0.000000, X, Y) [Sat Jun 15 10:27:07 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43_src.reg [Sat Jun 15 10:27:07 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (305, 187) - (423, 305) [Sat Jun 15 10:27:07 2013] XMMSAS bgd. selection expression = annulus(31599.894000, 21328.199200, 1711.430049, 3422.860098, X, Y) && !ellipse(33527.820600, 20423.556200, 940.272027, 940.272027, 0.000000, X, Y) && !ellipse(34904.026000, 18282.316000, 1872.632054, 1872.632054, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(33727.158000, 20315.404000, 1366.096039, 1366.096039, 0.000000, X, Y) && !ellipse(30553.330505, 22067.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31571.070000, 21334.994000, 1547.952045, 1547.952045, 0.000000, X, Y) && !ellipse(29127.940000, 22955.644000, 807.120023, 807.120023, 0.000000, X, Y) && !ellipse(35615.658936, 17778.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.652000, 23295.056000, 1246.032036, 1246.032036, 0.000000, X, Y) && !ellipse(29559.169460, 22692.891366, 463.468054, 343.651939, 336.457652, X, Y) && !ellipse(34620.986725, 20830.731369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.841766, 17264.466812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27942.271000, 23832.117400, 1369.136039, 171.141605, 215.877000, X, Y) && !ellipse(34752.086761, 22141.498093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35296.951874, 23275.082764, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 15 10:27:07 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43.gif [Sat Jun 15 10:43:38 2013] Mean detx,y = (2946.21, -7460.66) [Sat Jun 15 10:43:40 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 15 10:44:11 2013] Binned source spectrum to 10 counts/bin [Sat Jun 15 10:44:11 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43_src_b10.pi.gz [Sat Jun 15 10:44:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.pi.gz [Sun Jun 16 10:50:01 2013] Updating aperture counts using extracted products [Sun Jun 16 10:50:01 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 1586.00 [Sun Jun 16 10:50:01 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43_bgd.pi.gz = 6420.00 [Sun Jun 16 10:50:01 2013] Got source and background scale factors 2515480.000000, 15516828.000000 [Sun Jun 16 10:50:01 2013] User source parameters: Position = (363.8, 245.7) = 18 19 10.02 -15 0 32.7 Extent = 17.1 (13.7-19.3)", rotation angle = 0 Source aperture counts = 545.2 +/- 40.8 Background aperture counts = 1040.8 Rate = 0.007 +/- 0.0005 [Sun Jun 16 10:50:17 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 10:50:17 2013] Using photon index=1.80, rate=0.00921, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43.arf [Sun Jun 16 10:50:17 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 10:50:17 2013] Updating source flux to 2.5e-13 [Sun Jun 16 10:51:02 2013] Flag c found in src. 43 procflags, skipping spectral fitting [Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete