[Fri Jun 14 10:15:42 2013] Detection parameters:
  Position = (363.5, 245.8) = 18 19 10.11 -15 0 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.2 +/- 21.3
  Background counts = 107.6
  Rate = 0.004 +/- 0.0005

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 6.07'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.699
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.46"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun 14 10:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun 14 10:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 14 10:16:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 1421.200000, observed total counts = 1432.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 42 = 0.052516 pixels
[Fri Jun 14 10:17:16 2013] Warning, changing simple spatial fit ID from 21 to 15
[Fri Jun 14 10:17:16 2013] 1449.926000 total counts/ 620.453000 bgd. counts: snr = 33.300274
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.052516 pixels
  Position = (363.4, 245.8) = 18 19 10.12 -15 0 32.4
  Extent = 19.3 (19.3-38.7)", rotation angle = 0
  Source counts = 829.5 +/- 38.1
  Background counts = 620.5
  Rate = 0.01 +/- 0.0005
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 43
[Fri Jun 14 10:17:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 19.35"
[Fri Jun 14 10:17:59 2013] source mask rpix=4.4, npix_max = 97, mask sum = 60, frac = 0.613
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 19.35"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src21.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src21.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src21.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Jun 14 10:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:41 2013] Warning, spatial fit 21 centroid is now closest to src. 40
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:07 2013] XMMSAS src. selection expression = ellipse(31571.070000, 21334.994000, 1160.964033, 1160.964033, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42_src.reg
[Sat Jun 15 10:27:07 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (297, 179) - (430, 313)
[Sat Jun 15 10:27:07 2013] XMMSAS bgd. selection expression = annulus(31571.070000, 21334.994000, 1934.940056, 3869.880111, X, Y) && !ellipse(33527.820600, 20423.556200, 940.272027, 940.272027, 0.000000, X, Y) && !ellipse(36094.620000, 17087.322000, 820.712024, 820.712024, 0.000000, X, Y) && !ellipse(34904.026000, 18282.316000, 1872.632054, 1872.632054, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(33727.158000, 20315.404000, 1366.096039, 1366.096039, 0.000000, X, Y) && !ellipse(31599.894000, 21328.199200, 1369.144039, 1369.144039, 0.000000, X, Y) && !ellipse(30553.330505, 22067.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.940000, 22955.644000, 807.120023, 807.120023, 0.000000, X, Y) && !ellipse(35615.658936, 17778.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.652000, 23295.056000, 1246.032036, 1246.032036, 0.000000, X, Y) && !ellipse(29559.169460, 22692.891366, 463.468054, 343.651939, 336.457652, X, Y) && !ellipse(26925.924000, 24602.500000, 1104.176032, 1104.176032, 0.000000, X, Y) && !ellipse(34620.986725, 20830.731369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.841766, 17264.466812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27942.271000, 23832.117400, 1369.136039, 171.141605, 215.877000, X, Y) && !ellipse(34752.086761, 22141.498093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35296.951874, 23275.082764, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42.gif
[Sat Jun 15 10:46:27 2013] Mean detx,y = (2934.39, -7401.62) 
[Sat Jun 15 10:46:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:47:09 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:47:09 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Jun 15 10:47:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Jun 16 10:50:02 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:02 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 2074.00
[Sun Jun 16 10:50:03 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 7711.00
[Sun Jun 16 10:50:03 2013] Got source and background scale factors 3263820.000000, 19189982.000000
[Sun Jun 16 10:50:03 2013] User source parameters:
  Position = (363.4, 245.8) = 18 19 10.12 -15 0 32.4
  Extent = 19.3 (19.3-38.7)", rotation angle = 0
  Source aperture counts = 762.5 +/- 46.5
  Background aperture counts = 1311.5
  Rate = 0.01 +/- 0.0006

[Sun Jun 16 10:50:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:17 2013] Using photon index=1.80, rate=0.0111, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42.arf
[Sun Jun 16 10:50:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:17 2013] Updating source flux to 2.8e-13
[Sun Jun 16 10:51:02 2013] Flag c found in src. 42 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete