[Fri Jun 14 10:15:41 2013] Detection parameters:
  Position = (351.7, 254.2) = 18 19 13.63 -14 59 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.8 +/- 22.5
  Background counts = 103.6
  Rate = 0.004 +/- 0.0004

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 5.02'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.94"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jun 14 10:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jun 14 10:16:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jun 14 10:16:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:17:16 2013] Source 40 is offset by 1.107440 and -0.971688 pixels which is larger than
2 X fitted extent = 6.512460 x 0.893085, not incorporating fit results
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.94"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 10:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 1162.850000, observed total counts = 1041.000000
[Fri Jun 14 10:18:41 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 3470.640000, observed total counts = 2671.000000
[Fri Jun 14 10:18:41 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:07 2013] XMMSAS src. selection expression = ellipse(30553.330505, 22067.117447, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40_src.reg
[Sat Jun 15 10:27:07 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (314, 217) - (389, 292)
[Sat Jun 15 10:27:07 2013] XMMSAS bgd. selection expression = annulus(30553.330505, 22067.117447, 1087.500000, 2175.000000, X, Y) && !ellipse(33527.820600, 20423.556200, 940.272027, 940.272027, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(33727.158000, 20315.404000, 1366.096039, 1366.096039, 0.000000, X, Y) && !ellipse(31599.894000, 21328.199200, 1369.144039, 1369.144039, 0.000000, X, Y) && !ellipse(31571.070000, 21334.994000, 1547.952045, 1547.952045, 0.000000, X, Y) && !ellipse(29127.940000, 22955.644000, 807.120023, 807.120023, 0.000000, X, Y) && !ellipse(28624.652000, 23295.056000, 1246.032036, 1246.032036, 0.000000, X, Y) && !ellipse(29559.169460, 22692.891366, 463.468054, 343.651939, 336.457652, X, Y) && !ellipse(27942.271000, 23832.117400, 1369.136039, 171.141605, 215.877000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40.gif
[Sat Jun 15 10:46:01 2013] Mean detx,y = (2241.19, -6083.11) 
[Sat Jun 15 10:46:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:46:16 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:46:16 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jun 15 10:46:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jun 15 11:54:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 11:54:12 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:02 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:02 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 773.00
[Sun Jun 16 10:50:02 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 1927.00
[Sun Jun 16 10:50:02 2013] Got source and background scale factors 1057634.000000, 4773169.000000
[Sun Jun 16 10:50:02 2013] User source parameters:
  Position = (351.7, 254.2) = 18 19 13.63 -14 59 54.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 346.0 +/- 28.8
  Background aperture counts = 427.0
  Rate = 0.005 +/- 0.0004

[Sun Jun 16 10:50:02 2013] Updating counts from extracted products
[Sun Jun 16 10:50:02 2013] Set source signif. to 346.02/20.66 = 16.75
[Sun Jun 16 10:50:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:17 2013] Using photon index=1.80, rate=0.00463, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40.arf
[Sun Jun 16 10:50:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:17 2013] Updating source flux to 1.2e-13
[Sun Jun 16 10:51:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete