[Fri Jun 14 10:15:41 2013] Detection parameters:
  Position = (305.0, 287.2) = 18 19 27.66 -14 57 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.2 +/- 24.2
  Background counts = 104.3
  Rate = 0.003 +/- 0.0003

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 0.95'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Fri Jun 14 10:16:34 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 6.90"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src30.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning, spatial fit 30 centroid is now closest to src. 50
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 50
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Fri Jun 14 10:17:59 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 6.90"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jun 14 10:18:00 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src30 appears to have run properly
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 1370.790000, observed total counts = 1370.000000
[Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 35 = 6.326136 pixels
[Fri Jun 14 10:18:41 2013] 1281.619000 total counts/ 855.481000 bgd. counts: snr = 14.569514
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 6.326136 pixels
  Position = (310.1, 283.3) = 18 19 26.15 -14 57 49.0
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 426.1 +/- 35.8
  Background counts = 855.5
  Rate = 0.006 +/- 0.0005
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:07 2013] XMMSAS src. selection expression = ellipse(26925.924000, 24602.500000, 828.132024, 828.132024, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jun 15 10:27:07 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (262, 236) - (358, 331)
[Sat Jun 15 10:27:07 2013] XMMSAS bgd. selection expression = annulus(26925.924000, 24602.500000, 1380.220040, 2760.440079, X, Y) && !ellipse(24618.594600, 24320.221400, 432.464812, 432.464812, 0.000000, X, Y) && !ellipse(24623.680654, 26739.507474, 1133.168033, 199.880936, 45.786997, X, Y) && !ellipse(30553.330505, 22067.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.940000, 22955.644000, 807.120023, 807.120023, 0.000000, X, Y) && !ellipse(28624.652000, 23295.056000, 1246.032036, 1246.032036, 0.000000, X, Y) && !ellipse(29559.169460, 22692.891366, 463.468054, 343.651939, 336.457652, X, Y) && !ellipse(24972.357595, 26388.699069, 1369.136039, 204.820612, 224.908842, X, Y) && !ellipse(27942.271000, 23832.117400, 1369.136039, 171.141605, 215.877000, X, Y) && !ellipse(26154.302000, 25270.672000, 1051.272030, 1051.272030, 0.000000, X, Y)
[Sat Jun 15 10:27:07 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35.gif
[Sat Jun 15 10:49:57 2013] Mean detx,y = (-109.82, -2411.51) 
[Sat Jun 15 10:49:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:50:07 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:50:09 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jun 15 10:50:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Jun 16 10:50:05 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:05 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 1386.00
[Sun Jun 16 10:50:05 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 5097.00
[Sun Jun 16 10:50:05 2013] Got source and background scale factors 2161600.000000, 12083132.000000
[Sun Jun 16 10:50:06 2013] User source parameters:
  Position = (310.1, 283.3) = 18 19 26.15 -14 57 49.0
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source aperture counts = 474.2 +/- 38.2
  Background aperture counts = 911.8
  Rate = 0.006 +/- 0.0005

[Sun Jun 16 10:50:18 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:18 2013] Using photon index=1.80, rate=0.0057, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35.arf
[Sun Jun 16 10:50:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:18 2013] Updating source flux to 1e-13
[Sun Jun 16 10:51:02 2013] Flag c found in src. 35 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete