[Fri Jun 14 10:15:41 2013] Detection parameters:
  Position = (252.7, 345.0) = 18 19 43.38 -14 53 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.3 +/- 23.0
  Background counts = 73.6
  Rate = 0.005 +/- 0.0004

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 4.74'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.747
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.80"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src14.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src14.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.569392 pixels away
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.747
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 8.80"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src14.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src14.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 1575.870000, observed total counts = 1571.000000
[Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 29 = 3.724661 pixels
[Fri Jun 14 10:18:41 2013] Warning, changing simple spatial fit ID from 14 to 9
[Fri Jun 14 10:18:41 2013] 1552.298000 total counts/ 887.391000 bgd. counts: snr = 22.320473
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 3.724661 pixels
  Position = (254.4, 341.7) = 18 19 42.87 -14 53 35.0
  Extent = 16.8 (16.8-16.8)", rotation angle = 0
  Source counts = 664.9 +/- 39.4
  Background counts = 887.4
  Rate = 0.009 +/- 0.0005
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:18:41 2013] Source is confused with source 12
[Sat Jun 15 10:27:06 2013] XMMSAS src. selection expression = ellipse(22081.012000, 29682.340000, 1006.980029, 1006.980029, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun 15 10:27:06 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (196, 284) - (312, 400)
[Sat Jun 15 10:27:06 2013] XMMSAS bgd. selection expression = annulus(22081.012000, 29682.340000, 1678.300048, 3356.600097, X, Y) && !ellipse(19332.851000, 28916.923000, 376.895211, 376.895211, 0.000000, X, Y) && !ellipse(23540.068660, 27811.105600, 511.448815, 511.448815, 0.000000, X, Y) && !ellipse(22516.872772, 29178.065155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22785.440000, 28753.208000, 1342.648039, 1342.648039, 0.000000, X, Y) && !ellipse(24623.680654, 26739.507474, 1133.168033, 199.880936, 45.786997, X, Y) && !ellipse(24972.357595, 26388.699069, 1369.136039, 204.820612, 224.908842, X, Y) && !ellipse(25339.431763, 30733.280426, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29.gif
[Sat Jun 15 10:43:06 2013] Mean detx,y = (-4870.93, 2618.28) 
[Sat Jun 15 10:43:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:43:28 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:43:28 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun 15 10:43:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Jun 16 10:50:01 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:01 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1944.00
[Sun Jun 16 10:50:01 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 6229.00
[Sun Jun 16 10:50:01 2013] Got source and background scale factors 2937832.000000, 14968020.000000
[Sun Jun 16 10:50:01 2013] User source parameters:
  Position = (254.4, 341.7) = 18 19 42.87 -14 53 35.0
  Extent = 16.8 (16.8-16.8)", rotation angle = 0
  Source aperture counts = 721.4 +/- 45.1
  Background aperture counts = 1222.6
  Rate = 0.01 +/- 0.0006

[Sun Jun 16 10:50:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:17 2013] Using photon index=1.80, rate=0.00889, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29.arf
[Sun Jun 16 10:50:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:17 2013] Updating source flux to 1.7e-13
[Sun Jun 16 10:51:02 2013] Flag c found in src. 29 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete