[Fri Jun 14 10:15:41 2013] Detection parameters:
  Position = (185.7, 416.8) = 18 20 3.45 -14 48 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.4 +/- 20.6
  Background counts = 89.4
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 11.85'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 12.35"
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src53.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src53.csv
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Jun 14 10:16:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src53.csv
[Fri Jun 14 10:16:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri Jun 14 10:17:16 2013] Warning, spatial fit 53 centroid is now closest to src. 47
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 12.35"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 12.35"
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src51.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src51.csv
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src51_1.ximg exists
[Fri Jun 14 10:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src51.csv
[Fri Jun 14 10:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Fri Jun 14 10:18:02 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Jun 14 10:18:02 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Jun 14 10:18:41 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 13.077297 pixels away
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:08 2013] XMMSAS src. selection expression = ellipse(16109.745453, 36217.235474, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun 15 10:27:08 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (148, 379) - (223, 454)
[Sat Jun 15 10:27:08 2013] XMMSAS bgd. selection expression = annulus(16109.745453, 36217.235474, 1087.500000, 2175.000000, X, Y) && !ellipse(18306.750336, 36319.079742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18126.605270, 36816.621613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16965.676453, 37101.538116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17166.786957, 35392.209015, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:08 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27.gif
[Sat Jun 15 10:56:57 2013] Mean detx,y = (-11189.69, 8979.47) 
[Sat Jun 15 10:56:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:57:07 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:57:07 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jun 15 10:57:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun 15 12:53:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 12:53:21 2013] rmf not generated due to insufficient counts
[Sun Jun 16 10:50:13 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:13 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 725.00
[Sun Jun 16 10:50:13 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 2483.00
[Sun Jun 16 10:50:13 2013] Got source and background scale factors 1347200.000000, 6267353.000000
[Sun Jun 16 10:50:13 2013] User source parameters:
  Position = (185.7, 416.8) = 18 20 3.45 -14 48 6.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 191.3 +/- 27.9
  Background aperture counts = 533.7
  Rate = 0.003 +/- 0.0004

[Sun Jun 16 10:50:13 2013] Updating counts from extracted products
[Sun Jun 16 10:50:13 2013] Set source signif. to 191.27/23.10 = 8.28
[Sun Jun 16 10:50:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:19 2013] Using photon index=1.80, rate=0.00256, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27.arf
[Sun Jun 16 10:50:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:19 2013] Updating source flux to 9.8e-14
[Sun Jun 16 10:51:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete