[Fri Jun 14 10:15:41 2013] Detection parameters:
  Position = (375.1, 240.1) = 18 19 6.61 -15 0 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.4 +/- 24.0
  Background counts = 111.3
  Rate = 0.005 +/- 0.0005

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 6.99'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.92"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src13.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src13.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 14 10:16:37 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 14 10:16:37 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 1627.170000, observed total counts = 1625.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 15 = 7.617714 pixels
[Fri Jun 14 10:17:16 2013] 1567.726000 total counts/ 678.020000 bgd. counts: snr = 34.168449
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 7.617714 pixels
  Position = (381.7, 236.2) = 18 19 4.64 -15 1 13.9
  Extent = 19.8 (19.8-39.7)", rotation angle = 0
  Source counts = 889.7 +/- 39.6
  Background counts = 678.0
  Rate = 0.01 +/- 0.0005
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 3033.710000, observed total counts = 3030.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 15 = 6.860033 pixels
[Fri Jun 14 10:17:16 2013] Warning, changing simple spatial fit ID from 13 to 31
[Fri Jun 14 10:17:16 2013] 2906.943000 total counts/ 2409.380000 bgd. counts: snr = 10.136673
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 6.860033 pixels
  Position = (388.2, 234.1) = 18 19 2.68 -15 1 23.3
  Extent = 17.1 (14.5-20.6)", rotation angle = 0
  Source counts = 497.6 +/- 53.9
  Background counts = 2409.4
  Rate = 0.007 +/- 0.0007
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 1
[Fri Jun 14 10:17:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 17.08"
[Fri Jun 14 10:17:59 2013] source mask rpix=3.9, npix_max = 78, mask sum = 72, frac = 0.919
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 17.08"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src13.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src13.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun 14 10:18:41 2013] Source 15 is offset by -0.049540 and 6.945885 pixels which is larger than
2 X fitted extent = 1.265356 x 1.265356, not incorporating fit results
[Fri Jun 14 10:18:41 2013] Warning, spatial fit 13 centroid is now closest to src. 17
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:06 2013] XMMSAS src. selection expression = ellipse(33727.158000, 20315.404000, 1024.572029, 1024.572029, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun 15 10:27:06 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (329, 175) - (447, 293)
[Sat Jun 15 10:27:06 2013] XMMSAS bgd. selection expression = annulus(33727.158000, 20315.404000, 1707.620049, 3415.240098, X, Y) && !ellipse(33527.820600, 20423.556200, 940.272027, 940.272027, 0.000000, X, Y) && !ellipse(36094.620000, 17087.322000, 820.712024, 820.712024, 0.000000, X, Y) && !ellipse(34904.026000, 18282.316000, 1872.632054, 1872.632054, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(31599.894000, 21328.199200, 1369.144039, 1369.144039, 0.000000, X, Y) && !ellipse(36854.453125, 16920.367050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30553.330505, 22067.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31571.070000, 21334.994000, 1547.952045, 1547.952045, 0.000000, X, Y) && !ellipse(35615.658936, 17778.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34620.986725, 20830.731369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35174.841766, 17264.466812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37756.829962, 17677.270416, 847.784024, 682.846811, 90.000000, X, Y) && !ellipse(36488.643188, 19185.692474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34752.086761, 22141.498093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.921295, 19272.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36622.369049, 17695.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37891.143829, 18035.030655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35296.951874, 23275.082764, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15.gif
[Sat Jun 15 10:42:44 2013] Mean detx,y = (3785.24, -9524.67) 
[Sat Jun 15 10:42:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:43:01 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:43:01 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 15 10:43:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jun 16 10:50:00 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:50:00 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 6897.00
[Sun Jun 16 10:50:01 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 2952.00
[Sun Jun 16 10:50:01 2013] Got source and background scale factors 3249644.000000, 7024852.000000
[Sun Jun 16 10:50:01 2013] User source parameters:
  Position = (388.2, 234.1) = 18 19 2.68 -15 1 23.3
  Extent = 17.1 (14.5-20.6)", rotation angle = 0
  Source aperture counts = 5531.4 +/- 84.1
  Background aperture counts = 1365.6
  Rate = 0.07 +/- 0.001

[Sun Jun 16 10:50:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:17 2013] Using photon index=1.80, rate=0.00665, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15.arf
[Sun Jun 16 10:50:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:17 2013] Updating source flux to 2e-13
[Sun Jun 16 10:51:02 2013] Flag b found in src. 15 procflags, skipping spectral fitting
[Sun Jun 16 10:51:02 2013] Flag c found in src. 15 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete