[Fri Jun 14 10:15:40 2013] Detection parameters:
  Position = (222.8, 333.0) = 18 19 52.33 -14 54 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 731.2 +/- 35.4
  Background counts = 90.6
  Rate = 0.01 +/- 0.0006

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 6.03'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 9.44"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.052
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.44"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 10:16:36 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 1280.290000, observed total counts = 1281.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 13 = 0.061577 pixels
[Fri Jun 14 10:17:16 2013] 1278.398000 total counts/ 841.105000 bgd. counts: snr = 15.078128
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.061577 pixels
  Position = (222.8, 332.9) = 18 19 52.35 -14 54 13.2
  Extent = 4.7 (4.2-5.1)", rotation angle = 0
  Source counts = 437.3 +/- 35.8
  Background counts = 841.1
  Rate = 0.006 +/- 0.0005
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 4.66"
[Fri Jun 14 10:17:59 2013] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.216
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 4.66"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 10:18:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 10:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 14 10:18:41 2013] Spatial fit model total counts = 1260.000000, observed total counts = 1260.000000
[Fri Jun 14 10:18:41 2013] Offset between fit and detection position for source 13 = 0.007946 pixels
[Fri Jun 14 10:18:41 2013] 1261.952000 total counts/ 819.952000 bgd. counts: snr = 15.435761
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.007946 pixels
  Position = (222.8, 332.9) = 18 19 52.35 -14 54 13.3
  Extent = 4.7 (4.2-5.2)", rotation angle = 0
  Source counts = 442.0 +/- 35.5
  Background counts = 820.0
  Rate = 0.006 +/- 0.0005
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:06 2013] XMMSAS src. selection expression = ellipse(19332.851000, 28916.923000, 282.671408, 282.671408, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 15 10:27:06 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (207, 317) - (239, 349)
[Sat Jun 15 10:27:06 2013] XMMSAS bgd. selection expression = annulus(19332.851000, 28916.923000, 471.119014, 942.238027, X, Y)
[Sat Jun 15 10:27:06 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13.gif
[Sat Jun 15 10:30:31 2013] Mean detx,y = (-4056.46, 5357.87) 
[Sat Jun 15 10:30:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:30:41 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:30:42 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 15 10:30:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 16 10:49:58 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:58 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 553.00
[Sun Jun 16 10:49:58 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 811.00
[Sun Jun 16 10:49:58 2013] Got source and background scale factors 249600.000000, 2104000.000000
[Sun Jun 16 10:49:58 2013] User source parameters:
  Position = (222.8, 332.9) = 18 19 52.35 -14 54 13.3
  Extent = 4.7 (4.2-5.2)", rotation angle = 0
  Source aperture counts = 456.8 +/- 24.5
  Background aperture counts = 96.2
  Rate = 0.006 +/- 0.0003

[Sun Jun 16 10:50:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:16 2013] Using photon index=1.80, rate=0.00591, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13.arf
[Sun Jun 16 10:50:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:16 2013] Updating source flux to 1.6e-13
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete