[Fri Jun 14 10:15:40 2013] Detection parameters:
  Position = (385.2, 235.2) = 18 19 3.58 -15 1 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1228.0 +/- 46.7
  Background counts = 116.5
  Rate = 0.03 +/- 0.001

[Fri Jun 14 10:15:42 2013] Off-axis axis estimate = 7.79'
[Fri Jun 14 10:16:34 2013] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:16:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:16:34 2013] Initial guess for spatial extent in simple fitting = 10.32"
[Fri Jun 14 10:16:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.091
[Fri Jun 14 10:16:34 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.32"
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 14 10:16:35 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 14 10:16:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 14 10:16:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 14 10:16:36 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 14 10:16:36 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun 14 10:17:16 2013] Spatial fit model total counts = 4087.530000, observed total counts = 4089.000000
[Fri Jun 14 10:17:16 2013] Offset between fit and detection position for source 1 = 0.728664 pixels
[Fri Jun 14 10:17:16 2013] 4120.920000 total counts/ 3006.190000 bgd. counts: snr = 20.331128
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.728664 pixels
  Position = (385.9, 235.3) = 18 19 3.37 -15 1 17.9
  Extent = 11.8 (10.2-13.3)", rotation angle = 0
  Source counts = 1114.7 +/- 64.2
  Background counts = 3006.2
  Rate = 0.01 +/- 0.0009
[Fri Jun 14 10:17:17 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:17:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:17:17 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:17:17 2013] Source does appear to be extended
[Fri Jun 14 10:17:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 10:17:17 2013] Source is confused with source 15
[Fri Jun 14 10:17:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 10:17:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 10:17:59 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Fri Jun 14 10:17:59 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.024
[Fri Jun 14 10:17:59 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.75"
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 14 10:18:00 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 14 10:18:00 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 14 10:18:01 2013] fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 14 10:18:01 2013] Fit fullrun_mos1_xmm0505240101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 14 10:18:41 2013] Warning, spatial fit 2 centroid is now closest to src. 16
[Fri Jun 14 10:18:41 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 10:18:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 10:18:41 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 10:18:41 2013] Source does appear to be extended
[Fri Jun 14 10:18:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 10:27:06 2013] Counts = 1114.730000, rescaling region sizes by 2.000000
[Sat Jun 15 10:27:06 2013] XMMSAS src. selection expression = ellipse(33527.820600, 20423.556200, 1410.408041, 1410.408041, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing source region out to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 15 10:27:06 2013] Extracting stamp from image fullrun_mos1_xmm0505240101_pi300-10000_cl_sm2.00.img.gz, (305, 154) - (467, 316)
[Sat Jun 15 10:27:06 2013] XMMSAS bgd. selection expression = annulus(33527.820600, 20423.556200, 4701.360135, 9402.720271, X, Y) && !ellipse(24618.594600, 24320.221400, 432.464812, 432.464812, 0.000000, X, Y) && !ellipse(36094.620000, 17087.322000, 820.712024, 820.712024, 0.000000, X, Y) && !ellipse(39701.887400, 18326.916000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(34904.026000, 18282.316000, 1872.632054, 1872.632054, 0.000000, X, Y) && !ellipse(34310.586600, 18633.878000, 3522.752101, 1907.640055, 232.705000, X, Y) && !ellipse(38914.936000, 18484.726000, 681.368820, 681.368820, 0.000000, X, Y) && !ellipse(33727.158000, 20315.404000, 1366.096039, 1366.096039, 0.000000, X, Y) && !ellipse(31599.894000, 21328.199200, 1369.144039, 1369.144039, 0.000000, X, Y) && !ellipse(22785.440000, 28753.208000, 1342.648039, 1342.648039, 0.000000, X, Y) && !ellipse(36854.453125, 16920.367050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24623.680654, 26739.507474, 1133.168033, 199.880936, 45.786997, X, Y) && !ellipse(30553.330505, 22067.117447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31571.070000, 21334.994000, 1547.952045, 1547.952045, 0.000000, X, Y) && !ellipse(29127.940000, 22955.644000, 807.120023, 807.120023, 0.000000, X, Y) && !ellipse(35615.658936, 17778.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25896.063680, 15731.510000, 423.435212, 423.435212, 0.000000, X, Y) && !ellipse(28624.652000, 23295.056000, 1246.032036, 1246.032036, 0.000000, X, Y) && !ellipse(29559.169460, 22692.891366, 463.468054, 343.651939, 336.457652, X, Y) && !ellipse(26925.924000, 24602.500000, 1104.176032, 1104.176032, 0.000000, X, Y) && !ellipse(34620.986725, 20830.731369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.393400, 28655.110600, 246.927645, 246.927645, 0.000000, X, Y) && !ellipse(35174.841766, 17264.466812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37756.829962, 17677.270416, 847.784024, 682.846811, 90.000000, X, Y) && !ellipse(24972.357595, 26388.699069, 1369.136039, 204.820612, 224.908842, X, Y) && !ellipse(27942.271000, 23832.117400, 1369.136039, 171.141605, 215.877000, X, Y) && !ellipse(36488.643188, 19185.692474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.302000, 25270.672000, 1051.272030, 1051.272030, 0.000000, X, Y) && !ellipse(34752.086761, 22141.498093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.921295, 19272.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36622.369049, 17695.278503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.068000, 15752.812600, 1702.280049, 1702.280049, 0.000000, X, Y) && !ellipse(38294.859619, 17959.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37891.143829, 18035.030655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35296.951874, 23275.082764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38704.108490, 19546.060928, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 10:27:06 2013] Writing fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 15 10:27:51 2013] Mean detx,y = (3742.07, -9456.25) 
[Sat Jun 15 10:27:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 10:30:20 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 10:30:20 2013] Setting source spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 15 10:30:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 16 10:49:57 2013] Updating aperture counts using extracted products
[Sun Jun 16 10:49:57 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 9631.00
[Sun Jun 16 10:49:57 2013] Total counts from fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 49552.00
[Sun Jun 16 10:49:58 2013] Got source and background scale factors 6178668.000000, 156136927.000000
[Sun Jun 16 10:49:58 2013] User source parameters:
  Position = (385.9, 235.3) = 18 19 3.37 -15 1 17.9
  Extent = 11.8 (10.2-13.3)", rotation angle = 0
  Source aperture counts = 7670.1 +/- 99.1
  Background aperture counts = 1960.9
  Rate = 0.1 +/- 0.001

[Sun Jun 16 10:50:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 10:50:16 2013] Using photon index=1.80, rate=0.0149, arf fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 16 10:50:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 10:50:16 2013] Updating source flux to 4.1e-13
[Sun Jun 16 10:51:02 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jun 16 10:51:36 2013] xmm0505240101/analysis//spectral/fullrun_mos1_xmm0505240101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete