[Tue Nov 29 19:44:25 2011] Detection parameters:
  Position = (273.1, 288.8) = 3 41 19.87 15 24 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.4 +/- 40.1
  Background counts = 451.1
  Rate = 0.01 +/- 0.001

[Tue Nov 29 19:44:28 2011] Off-axis axis estimate = 1.96'
[Tue Nov 29 19:50:57 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 19:50:57 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Tue Nov 29 19:50:57 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Tue Nov 29 19:50:57 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.41"
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src6.ximg exists
[Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src6.csv
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src6.csv
[Tue Nov 29 23:22:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Nov 29 23:22:13 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Nov 30 04:22:07 2011] Warning, spatial fit 6 centroid is now closest to src. 37
[Wed Nov 30 04:22:07 2011] Source 6 is offset by -6.901809 and -3.469422 pixels which is larger than
2 X fitted extent = 2.572349 x 2.572349, not incorporating fit results
[Wed Nov 30 04:22:07 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:07 2011] Assessing source extent using major
[Wed Nov 30 04:22:07 2011] Source does appear to be extended
[Wed Nov 30 04:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:22:07 2011] Source is confused with source 3
[Wed Nov 30 04:22:07 2011] Source is confused with source 37
[Wed Nov 30 04:22:46 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 04:22:46 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Nov 30 04:22:46 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Wed Nov 30 04:22:46 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 7.41"
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src6.ximg exists
[Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src6.csv
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src6.csv
[Wed Nov 30 07:05:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Nov 30 07:05:45 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Nov 30 10:07:34 2011] Warning, spatial fit 6 centroid is now closest to src. 37
[Wed Nov 30 10:07:34 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.004105 pixels away
[Wed Nov 30 10:07:34 2011] Source 6 is offset by -6.911970 and -3.469422 pixels which is larger than
2 X fitted extent = 2.389108 x 2.389108, not incorporating fit results
[Wed Nov 30 10:07:34 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:34 2011] Assessing source extent using major
[Wed Nov 30 10:07:34 2011] Source does appear to be extended
[Wed Nov 30 10:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 10:08:09 2011] XMMSAS src. selection expression = ellipse(23713.770599, 25080.898285, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 10:08:09 2011] Writing source region out to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src6_src.reg
[Wed Nov 30 10:08:09 2011] Extracting stamp from image fullrun_pn_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (236, 251) - (311, 326)
[Wed Nov 30 10:08:09 2011] XMMSAS bgd. selection expression = annulus(23713.770599, 25080.898285, 1087.500000, 2175.000000, X, Y) && !ellipse(24491.518200, 23944.478400, 552.881616, 552.881616, 0.000000, X, Y) && !ellipse(23782.058000, 24283.788000, 1228.320035, 1228.320035, 0.000000, X, Y) && !ellipse(21927.068634, 24645.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.304000, 23643.484000, 1182.816034, 1182.816034, 0.000000, X, Y) && !ellipse(25974.294016, 23789.046005, 1264.192036, 831.997344, 13.695500, X, Y) && !ellipse(23356.408966, 23477.847351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.247314, 22905.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.876769, 23186.996986, 1233.296035, 557.400195, 199.605854, X, Y) && !ellipse(24157.304000, 22904.342000, 1299.032037, 1050.992030, 90.000000, X, Y) && !ellipse(25789.658200, 22616.669200, 1257.464036, 1257.464036, 0.000000, X, Y) && !ellipse(25957.552000, 25850.346000, 2075.840060, 2075.840060, 0.000000, X, Y) && !ellipse(24996.826782, 26044.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.330994, 25939.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.282000, 26108.746000, 1047.560030, 1047.560030, 0.000000, X, Y) && !ellipse(23132.502000, 25622.998000, 1185.544034, 1185.544034, 0.000000, X, Y) && !ellipse(25528.276000, 25179.718000, 1037.920030, 1037.920030, 0.000000, X, Y) && !ellipse(23884.396057, 22403.633118, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 10:08:09 2011] Writing fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src6.gif
[Wed Nov 30 10:20:29 2011] Mean detx,y = (876.31, 140.20) 
[Wed Nov 30 10:20:34 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 10:20:55 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 10:20:55 2011] Setting source spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Nov 30 10:20:55 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Nov 30 13:58:29 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov 30 13:58:29 2011] rmf not generated due to insufficient counts
[Wed Nov 30 20:24:01 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:01 2011] Error reading totcts from fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Nov 30 20:24:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:04 2011] Using photon index=1.80, rate=0.0108, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src6.arf
[Wed Nov 30 20:24:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:04 2011] Updating source flux to 2.5e-14
[Wed Nov 30 20:29:51 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting