[Tue Nov 29 19:44:27 2011] Detection parameters: Position = (317.3, 271.4) = 3 41 6.59 15 23 36.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 107.1 +/- 24.2 Background counts = 267.4 Rate = 0.003 +/- 0.0008 [Tue Nov 29 19:44:28 2011] Off-axis axis estimate = 2.39' [Tue Nov 29 19:50:57 2011] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 19:50:57 2011] Initial guess for spatial extent in simple fitting = 7.62" [Tue Nov 29 19:50:57 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.232 [Tue Nov 29 19:50:57 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 7.62" [Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src39.ximg exists [Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src39.csv [Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src39_1.ximg exists [Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src39.csv [Tue Nov 29 23:22:13 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src39_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 29 23:22:15 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Tue Nov 29 23:22:15 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Tue Nov 29 23:22:15 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly [Wed Nov 30 04:22:07 2011] Spatial fit model total counts = 2489.050000, observed total counts = 2539.000000 [Wed Nov 30 04:22:07 2011] Offset between fit and detection position for source 41 = 3.723938 pixels [Wed Nov 30 04:22:07 2011] 2510.190000 total counts/ 1502.760000 bgd. counts: snr = 25.987833 Spatial fit parameters: Offset between fit and detection position for source 41 = 3.723938 pixels Position = (319.0, 268.1) = 3 41 6.09 15 23 25.5 Extent = 15.2 (15.2-30.5)", rotation angle = 0 Source counts = 1007.4 +/- 50.1 Background counts = 1502.8 Rate = 0.02 +/- 0.001 [Wed Nov 30 04:22:07 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 04:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 04:22:07 2011] Assessing source extent using major axis lower bound [Wed Nov 30 04:22:07 2011] Source does appear to be extended [Wed Nov 30 04:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 04:22:07 2011] Source is confused with source 11 [Wed Nov 30 04:22:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Nov 30 04:22:46 2011] Initial guess for spatial extent in simple fitting = 15.24" [Wed Nov 30 04:22:46 2011] source mask rpix=3.5, npix_max = 64, mask sum = 37, frac = 0.577 [Wed Nov 30 04:22:46 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 15.24" [Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src36.ximg exists [Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src36.csv [Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src36_1.ximg exists [Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src36.csv [Wed Nov 30 07:05:45 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src36_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists [Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists [Wed Nov 30 07:05:46 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly [Wed Nov 30 10:07:34 2011] Warning, spatial fit 36 centroid is now closest to src. 40 [Wed Nov 30 10:07:34 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 10:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 10:07:34 2011] Assessing source extent using major axis lower bound [Wed Nov 30 10:07:34 2011] Source does appear to be extended [Wed Nov 30 10:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 10:08:11 2011] Counts = 1007.430000, rescaling region sizes by 2.000000 [Wed Nov 30 10:08:11 2011] XMMSAS src. selection expression = ellipse(27700.259000, 23275.844000, 1829.400053, 1829.400053, 0.000000, X, Y) [Wed Nov 30 10:08:11 2011] Writing source region out to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src41_src.reg [Wed Nov 30 10:08:11 2011] Extracting stamp from image fullrun_pn_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (214, 163) - (424, 373) [Wed Nov 30 10:08:11 2011] XMMSAS bgd. selection expression = annulus(27700.259000, 23275.844000, 6098.000175, 12196.000351, X, Y) && !ellipse(24491.518200, 23944.478400, 552.881616, 552.881616, 0.000000, X, Y) && !ellipse(23782.058000, 24283.788000, 1228.320035, 1228.320035, 0.000000, X, Y) && !ellipse(17334.047600, 10930.006200, 444.919213, 444.919213, 0.000000, X, Y) && !ellipse(37841.871796, 28644.303375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23713.770599, 25080.898285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35917.410980, 24945.048401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21927.068634, 24645.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34152.995331, 24298.519562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.304000, 23643.484000, 1182.816034, 1182.816034, 0.000000, X, Y) && !ellipse(25974.294016, 23789.046005, 1264.192036, 831.997344, 13.695500, X, Y) && !ellipse(23356.408966, 23477.847351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.247314, 22905.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.876769, 23186.996986, 1233.296035, 557.400195, 199.605854, X, Y) && !ellipse(24157.304000, 22904.342000, 1299.032037, 1050.992030, 90.000000, X, Y) && !ellipse(17694.768000, 11254.712000, 2180.200063, 1048.584030, 118.797000, X, Y) && !ellipse(32499.330580, 21361.616120, 418.406412, 367.654411, 100.542337, X, Y) && !ellipse(25789.658200, 22616.669200, 1257.464036, 1257.464036, 0.000000, X, Y) && !ellipse(30173.067800, 20644.834600, 400.845612, 400.845612, 0.000000, X, Y) && !ellipse(19634.022800, 15610.242200, 460.730413, 383.894411, 214.360031, X, Y) && !ellipse(33954.672607, 35778.452057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.920500, 30405.007200, 427.244812, 427.244812, 0.000000, X, Y) && !ellipse(29739.619781, 29448.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.552000, 25850.346000, 2075.840060, 2075.840060, 0.000000, X, Y) && !ellipse(24996.826782, 26044.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.330994, 25939.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.282000, 26108.746000, 1047.560030, 1047.560030, 0.000000, X, Y) && !ellipse(23132.502000, 25622.998000, 1185.544034, 1185.544034, 0.000000, X, Y) && !ellipse(25528.276000, 25179.718000, 1037.920030, 1037.920030, 0.000000, X, Y) && !ellipse(27263.810272, 24035.254822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32701.243800, 22771.651800, 512.431215, 512.431215, 0.000000, X, Y) && !ellipse(23884.396057, 22403.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15684.632782, 22219.988724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.512200, 21975.488000, 910.800026, 910.800026, 0.000000, X, Y) && !ellipse(24359.463104, 21889.813263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.408400, 19466.106600, 500.231214, 500.231214, 0.000000, X, Y) && !ellipse(21874.022310, 19268.909000, 376.323211, 376.323211, 0.000000, X, Y) && !ellipse(31090.458862, 17184.807968, 870.000000, 870.000000, 0.000000, X, Y) [Wed Nov 30 10:08:11 2011] Writing fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src41.gif [Wed Nov 30 11:18:59 2011] Mean detx,y = (-3189.12, -600.70) [Wed Nov 30 11:19:07 2011] Setting backscal keywords in source and bgd. spectrum [Wed Nov 30 11:25:39 2011] Binned source spectrum to 10 counts/bin [Wed Nov 30 11:25:40 2011] Setting source spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Wed Nov 30 11:25:40 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src41_bgd.pi.gz [Wed Nov 30 20:24:03 2011] Updating aperture counts using extracted products [Wed Nov 30 20:24:03 2011] Error reading totcts from fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Wed Nov 30 20:24:05 2011] Calculating source flux in energy range 0.30-8.00 [Wed Nov 30 20:24:05 2011] Using photon index=1.80, rate=0.0239, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src41.arf [Wed Nov 30 20:24:05 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Nov 30 20:24:05 2011] Updating source flux to 6.5e-14 [Wed Nov 30 20:29:51 2011] Flag c found in src. 41 procflags, skipping spectral fitting