[Tue Nov 29 19:44:26 2011] Detection parameters: Position = (268.8, 293.1) = 3 41 21.16 15 25 12.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 285.3 +/- 37.1 Background counts = 421.9 Rate = 0.008 +/- 0.001 [Tue Nov 29 19:44:28 2011] Off-axis axis estimate = 2.18' [Tue Nov 29 19:50:57 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 19:50:57 2011] Initial guess for spatial extent in simple fitting = 7.52" [Tue Nov 29 19:50:57 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805 [Tue Nov 29 19:50:57 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 7.52" [Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src35.ximg exists [Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src35.csv [Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src35_1.ximg exists [Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src35.csv [Tue Nov 29 23:22:13 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 29 23:22:14 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Tue Nov 29 23:22:14 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Tue Nov 29 23:22:14 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Wed Nov 30 04:22:07 2011] Spatial fit model total counts = 6670.940000, observed total counts = 6673.000000 [Wed Nov 30 04:22:07 2011] Offset between fit and detection position for source 37 = 2.914137 pixels [Wed Nov 30 04:22:07 2011] Warning, changing simple spatial fit ID from 35 to 6 [Wed Nov 30 04:22:07 2011] 6602.272000 total counts/ 6259.910000 bgd. counts: snr = 4.327146 Spatial fit parameters: Offset between fit and detection position for source 37 = 2.914137 pixels Position = (266.2, 294.3) = 3 41 21.96 15 25 19.4 Extent = 14.8 (14.8-29.6)", rotation angle = 0 Source counts = 342.4 +/- 81.3 Background counts = 6259.9 Rate = 0.008 +/- 0.002 [Wed Nov 30 04:22:07 2011] Spatial fit model total counts = 5489.990000, observed total counts = 5490.000000 [Wed Nov 30 04:22:07 2011] Offset between fit and detection position for source 37 = 0.713903 pixels [Wed Nov 30 04:22:07 2011] Warning, changing simple spatial fit ID from 6 to 35 [Wed Nov 30 04:22:07 2011] 5405.745000 total counts/ 5052.580000 bgd. counts: snr = 4.968452 Spatial fit parameters: Offset between fit and detection position for source 37 = 0.713903 pixels Position = (266.8, 294.5) = 3 41 21.76 15 25 20.6 Extent = 12.6 (8.0-15.0)", rotation angle = 0 Source counts = 353.2 +/- 73.5 Background counts = 5052.6 Rate = 0.008 +/- 0.002 [Wed Nov 30 04:22:07 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 04:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 04:22:07 2011] Assessing source extent using major axis lower bound [Wed Nov 30 04:22:07 2011] Source does appear to be extended [Wed Nov 30 04:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 04:22:07 2011] Source is confused with source 6 [Wed Nov 30 04:22:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Nov 30 04:22:46 2011] Initial guess for spatial extent in simple fitting = 12.64" [Wed Nov 30 04:22:46 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056 [Wed Nov 30 04:22:46 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 12.64" [Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src33.ximg exists [Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src33.csv [Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src33_1.ximg exists [Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src33.csv [Wed Nov 30 07:05:45 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src33_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists [Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists [Wed Nov 30 07:05:46 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly [Wed Nov 30 10:07:34 2011] Spatial fit model total counts = 6672.210000, observed total counts = 6673.000000 [Wed Nov 30 10:07:34 2011] Offset between fit and detection position for source 37 = 0.662108 pixels [Wed Nov 30 10:07:34 2011] Warning, changing simple spatial fit ID from 33 to 6 [Wed Nov 30 10:07:34 2011] 6641.905000 total counts/ 6327.720000 bgd. counts: snr = 3.949679 Spatial fit parameters: Offset between fit and detection position for source 37 = 0.662108 pixels Position = (266.4, 295.1) = 3 41 21.88 15 25 22.9 Extent = 14.8 (14.8-29.6)", rotation angle = 0 Source counts = 314.2 +/- 81.5 Background counts = 6327.7 Rate = 0.007 +/- 0.002 [Wed Nov 30 10:07:34 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 10:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 10:07:34 2011] Assessing source extent using major axis lower bound [Wed Nov 30 10:07:34 2011] Source does appear to be extended [Wed Nov 30 10:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 10:08:11 2011] XMMSAS src. selection expression = ellipse(23132.502000, 25622.998000, 889.158026, 889.158026, 0.000000, X, Y) [Wed Nov 30 10:08:11 2011] Writing source region out to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src37_src.reg [Wed Nov 30 10:08:11 2011] Extracting stamp from image fullrun_pn_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (215, 244) - (318, 346) [Wed Nov 30 10:08:11 2011] XMMSAS bgd. selection expression = annulus(23132.502000, 25622.998000, 1481.930043, 2963.860085, X, Y) && !ellipse(24491.518200, 23944.478400, 552.881616, 552.881616, 0.000000, X, Y) && !ellipse(23782.058000, 24283.788000, 1228.320035, 1228.320035, 0.000000, X, Y) && !ellipse(23713.770599, 25080.898285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21927.068634, 24645.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.304000, 23643.484000, 1182.816034, 1182.816034, 0.000000, X, Y) && !ellipse(25974.294016, 23789.046005, 1264.192036, 831.997344, 13.695500, X, Y) && !ellipse(23356.408966, 23477.847351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.247314, 22905.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.876769, 23186.996986, 1233.296035, 557.400195, 199.605854, X, Y) && !ellipse(24157.304000, 22904.342000, 1299.032037, 1050.992030, 90.000000, X, Y) && !ellipse(25789.658200, 22616.669200, 1257.464036, 1257.464036, 0.000000, X, Y) && !ellipse(25957.552000, 25850.346000, 2075.840060, 2075.840060, 0.000000, X, Y) && !ellipse(24996.826782, 26044.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.330994, 25939.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.282000, 26108.746000, 1047.560030, 1047.560030, 0.000000, X, Y) && !ellipse(25528.276000, 25179.718000, 1037.920030, 1037.920030, 0.000000, X, Y) && !ellipse(23884.396057, 22403.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.512200, 21975.488000, 910.800026, 910.800026, 0.000000, X, Y) && !ellipse(24359.463104, 21889.813263, 870.000000, 870.000000, 0.000000, X, Y) [Wed Nov 30 10:08:11 2011] Writing fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src37.gif [Wed Nov 30 11:15:54 2011] Mean detx,y = (1520.28, 514.30) [Wed Nov 30 11:16:01 2011] Setting backscal keywords in source and bgd. spectrum [Wed Nov 30 11:16:33 2011] Binned source spectrum to 10 counts/bin [Wed Nov 30 11:16:34 2011] Setting source spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src37_src_b10.pi.gz [Wed Nov 30 11:16:34 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src37_bgd.pi.gz [Wed Nov 30 20:24:03 2011] Updating aperture counts using extracted products [Wed Nov 30 20:24:03 2011] Error reading totcts from fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src37_src_b10.pi.gz [Wed Nov 30 20:24:05 2011] Calculating source flux in energy range 0.30-8.00 [Wed Nov 30 20:24:05 2011] Using photon index=1.80, rate=0.00746, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src37.arf [Wed Nov 30 20:24:05 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Nov 30 20:24:05 2011] Updating source flux to 1.7e-14 [Wed Nov 30 20:29:51 2011] Flag c found in src. 37 procflags, skipping spectral fitting