[Tue Nov 29 19:44:26 2011] Detection parameters: Position = (293.7, 301.0) = 3 41 13.69 15 25 50.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 127.1 +/- 27.9 Background counts = 343.7 Rate = 0.004 +/- 0.0008 [Tue Nov 29 19:44:28 2011] Off-axis axis estimate = 0.39' [Tue Nov 29 19:50:57 2011] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 19:50:57 2011] Initial guess for spatial extent in simple fitting = 6.62" [Tue Nov 29 19:50:57 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978 [Tue Nov 29 19:50:57 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 6.62" [Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src31.ximg exists [Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src31.csv [Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src31_1.ximg exists [Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src31.csv [Tue Nov 29 23:22:13 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 29 23:22:14 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Tue Nov 29 23:22:14 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Tue Nov 29 23:22:14 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Wed Nov 30 04:22:07 2011] Source 33 is offset by -2.773398 and -7.111398 pixels which is larger than 2 X fitted extent = 1.073683 x 1.073683, not incorporating fit results [Wed Nov 30 04:22:07 2011] Source 33 is offset by 3.608961 and -6.286938 pixels which is larger than 2 X fitted extent = 6.263035 x 6.263035, not incorporating fit results [Wed Nov 30 04:22:07 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 04:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 04:22:07 2011] Assessing source extent using major [Wed Nov 30 04:22:07 2011] Source does appear to be extended [Wed Nov 30 04:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 04:22:07 2011] Source is confused with source 34 [Wed Nov 30 04:22:46 2011] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting [Wed Nov 30 04:22:46 2011] Initial guess for spatial extent in simple fitting = 6.62" [Wed Nov 30 04:22:46 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978 [Wed Nov 30 04:22:46 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 6.62" [Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src29.ximg exists [Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src29_1.ximg exists [Wed Nov 30 07:05:45 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src29 appears to have run properly [Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Wed Nov 30 07:05:46 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Wed Nov 30 10:07:34 2011] Source 33 is offset by 1.279329 and -1.766515 pixels which is larger than 2 X fitted extent = 0.795246 x 0.795246, not incorporating fit results [Wed Nov 30 10:07:34 2011] Source 33 is offset by 3.565747 and -6.286938 pixels which is larger than 2 X fitted extent = 6.266759 x 6.266759, not incorporating fit results [Wed Nov 30 10:07:34 2011] Spatial fit model total counts = 6579.800000, observed total counts = 6580.000000 [Wed Nov 30 10:07:34 2011] Offset between fit and detection position for source 33 = 6.190687 pixels [Wed Nov 30 10:07:34 2011] Warning, changing simple spatial fit ID from 29 to 34 [Wed Nov 30 10:07:34 2011] 6225.241000 total counts/ 5603.570000 bgd. counts: snr = 8.304781 Spatial fit parameters: Offset between fit and detection position for source 33 = 6.190687 pixels Position = (298.9, 297.7) = 3 41 12.11 15 25 34.2 Extent = 25.9 (25.9-51.9)", rotation angle = 0 Source counts = 621.7 +/- 78.9 Background counts = 5603.6 Rate = 0.01 +/- 0.002 [Wed Nov 30 10:07:34 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 10:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 10:07:34 2011] Assessing source extent using major axis lower bound [Wed Nov 30 10:07:34 2011] Source does appear to be extended [Wed Nov 30 10:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 10:08:10 2011] XMMSAS src. selection expression = ellipse(25957.552000, 25850.346000, 1556.880045, 1556.880045, 0.000000, X, Y) [Wed Nov 30 10:08:10 2011] Writing source region out to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src33_src.reg [Wed Nov 30 10:08:10 2011] Extracting stamp from image fullrun_pn_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (209, 208) - (388, 387) [Wed Nov 30 10:08:10 2011] XMMSAS bgd. selection expression = annulus(25957.552000, 25850.346000, 2594.800075, 5189.600149, X, Y) && !ellipse(24491.518200, 23944.478400, 552.881616, 552.881616, 0.000000, X, Y) && !ellipse(23782.058000, 24283.788000, 1228.320035, 1228.320035, 0.000000, X, Y) && !ellipse(23713.770599, 25080.898285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21927.068634, 24645.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.304000, 23643.484000, 1182.816034, 1182.816034, 0.000000, X, Y) && !ellipse(25974.294016, 23789.046005, 1264.192036, 831.997344, 13.695500, X, Y) && !ellipse(23356.408966, 23477.847351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.247314, 22905.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.876769, 23186.996986, 1233.296035, 557.400195, 199.605854, X, Y) && !ellipse(24157.304000, 22904.342000, 1299.032037, 1050.992030, 90.000000, X, Y) && !ellipse(25789.658200, 22616.669200, 1257.464036, 1257.464036, 0.000000, X, Y) && !ellipse(30173.067800, 20644.834600, 400.845612, 400.845612, 0.000000, X, Y) && !ellipse(21159.920500, 30405.007200, 427.244812, 427.244812, 0.000000, X, Y) && !ellipse(29739.619781, 29448.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24996.826782, 26044.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.330994, 25939.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.282000, 26108.746000, 1047.560030, 1047.560030, 0.000000, X, Y) && !ellipse(23132.502000, 25622.998000, 1185.544034, 1185.544034, 0.000000, X, Y) && !ellipse(25528.276000, 25179.718000, 1037.920030, 1037.920030, 0.000000, X, Y) && !ellipse(27263.810272, 24035.254822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.259000, 23275.844000, 1219.600035, 1219.600035, 0.000000, X, Y) && !ellipse(23884.396057, 22403.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.512200, 21975.488000, 910.800026, 910.800026, 0.000000, X, Y) && !ellipse(24359.463104, 21889.813263, 870.000000, 870.000000, 0.000000, X, Y) [Wed Nov 30 10:08:10 2011] Writing fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src33.gif [Wed Nov 30 11:11:25 2011] Mean detx,y = (-913.25, 1179.84) [Wed Nov 30 11:11:32 2011] Setting backscal keywords in source and bgd. spectrum [Wed Nov 30 11:12:53 2011] Binned source spectrum to 10 counts/bin [Wed Nov 30 11:12:54 2011] Setting source spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Wed Nov 30 11:12:54 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src33_bgd.pi.gz [Wed Nov 30 20:24:03 2011] Updating aperture counts using extracted products [Wed Nov 30 20:24:03 2011] Error reading totcts from fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Wed Nov 30 20:24:05 2011] Calculating source flux in energy range 0.30-8.00 [Wed Nov 30 20:24:05 2011] Using photon index=1.80, rate=0.0148, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src33.arf [Wed Nov 30 20:24:05 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Nov 30 20:24:05 2011] Updating source flux to 3.3e-14 [Wed Nov 30 20:29:51 2011] Flag b found in src. 33 procflags, skipping spectral fitting [Wed Nov 30 20:29:51 2011] Flag c found in src. 33 procflags, skipping spectral fitting