[Tue Nov 29 19:44:25 2011] Detection parameters:
  Position = (294.9, 259.1) = 3 41 13.33 15 22 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 529.3 +/- 40.0
  Background counts = 357.5
  Rate = 0.02 +/- 0.001

[Tue Nov 29 19:44:28 2011] Off-axis axis estimate = 2.86'
[Tue Nov 29 19:50:57 2011] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 19:50:57 2011] Initial guess for spatial extent in simple fitting = 7.86"
[Tue Nov 29 19:50:57 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.752
[Tue Nov 29 19:50:57 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 7.86"
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src19.ximg exists
[Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src19.csv
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src19.csv
[Tue Nov 29 23:22:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 23:22:14 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Nov 29 23:22:14 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Nov 29 23:22:14 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Nov 30 04:22:07 2011] Spatial fit model total counts = 5526.920000, observed total counts = 5499.000000
[Wed Nov 30 04:22:07 2011] Offset between fit and detection position for source 20 = 2.532437 pixels
[Wed Nov 30 04:22:07 2011] 5277.030000 total counts/ 3825.250000 bgd. counts: snr = 23.473124
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.532437 pixels
  Position = (297.0, 260.5) = 3 41 12.70 15 22 52.6
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 1451.8 +/- 72.6
  Background counts = 3825.2
  Rate = 0.03 +/- 0.002
[Wed Nov 30 04:22:07 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:07 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 04:22:07 2011] Source does appear to be extended
[Wed Nov 30 04:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:22:07 2011] Source is confused with source 14
[Wed Nov 30 04:22:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 04:22:46 2011] Initial guess for spatial extent in simple fitting = 15.72"
[Wed Nov 30 04:22:46 2011] source mask rpix=3.6, npix_max = 67, mask sum = 69, frac = 1.019
[Wed Nov 30 04:22:46 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 15.72"
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src19.ximg exists
[Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src19.csv
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src19.csv
[Wed Nov 30 07:05:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Nov 30 07:05:46 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Nov 30 07:05:46 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Nov 30 10:07:34 2011] Warning, spatial fit 19 centroid is now closest to src. 11
[Wed Nov 30 10:07:34 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:34 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 10:07:34 2011] Source does appear to be extended
[Wed Nov 30 10:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 10:08:10 2011] Counts = 1451.780000, rescaling region sizes by 2.000000
[Wed Nov 30 10:08:10 2011] XMMSAS src. selection expression = ellipse(25789.658200, 22616.669200, 1886.196054, 1886.196054, 0.000000, X, Y)
[Wed Nov 30 10:08:10 2011] Writing source region out to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src20_src.reg
[Wed Nov 30 10:08:10 2011] Extracting stamp from image fullrun_pn_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (189, 152) - (405, 369)
[Wed Nov 30 10:08:10 2011] XMMSAS bgd. selection expression = annulus(25789.658200, 22616.669200, 6287.320181, 12574.640362, X, Y) && !ellipse(24491.518200, 23944.478400, 552.881616, 552.881616, 0.000000, X, Y) && !ellipse(23782.058000, 24283.788000, 1228.320035, 1228.320035, 0.000000, X, Y) && !ellipse(17334.047600, 10930.006200, 444.919213, 444.919213, 0.000000, X, Y) && !ellipse(37841.871796, 28644.303375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23713.770599, 25080.898285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35917.410980, 24945.048401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21927.068634, 24645.911560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34152.995331, 24298.519562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.304000, 23643.484000, 1182.816034, 1182.816034, 0.000000, X, Y) && !ellipse(25974.294016, 23789.046005, 1264.192036, 831.997344, 13.695500, X, Y) && !ellipse(23356.408966, 23477.847351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.247314, 22905.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.876769, 23186.996986, 1233.296035, 557.400195, 199.605854, X, Y) && !ellipse(24157.304000, 22904.342000, 1299.032037, 1050.992030, 90.000000, X, Y) && !ellipse(17694.768000, 11254.712000, 2180.200063, 1048.584030, 118.797000, X, Y) && !ellipse(32499.330580, 21361.616120, 418.406412, 367.654411, 100.542337, X, Y) && !ellipse(30173.067800, 20644.834600, 400.845612, 400.845612, 0.000000, X, Y) && !ellipse(12759.940125, 18471.174973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19634.022800, 15610.242200, 460.730413, 383.894411, 214.360031, X, Y) && !ellipse(33954.672607, 35778.452057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.920500, 30405.007200, 427.244812, 427.244812, 0.000000, X, Y) && !ellipse(29739.619781, 29448.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.552000, 25850.346000, 2075.840060, 2075.840060, 0.000000, X, Y) && !ellipse(24996.826782, 26044.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.330994, 25939.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.282000, 26108.746000, 1047.560030, 1047.560030, 0.000000, X, Y) && !ellipse(23132.502000, 25622.998000, 1185.544034, 1185.544034, 0.000000, X, Y) && !ellipse(25528.276000, 25179.718000, 1037.920030, 1037.920030, 0.000000, X, Y) && !ellipse(27263.810272, 24035.254822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.259000, 23275.844000, 1219.600035, 1219.600035, 0.000000, X, Y) && !ellipse(32701.243800, 22771.651800, 512.431215, 512.431215, 0.000000, X, Y) && !ellipse(23884.396057, 22403.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15684.632782, 22219.988724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.512200, 21975.488000, 910.800026, 910.800026, 0.000000, X, Y) && !ellipse(24359.463104, 21889.813263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.408400, 19466.106600, 500.231214, 500.231214, 0.000000, X, Y) && !ellipse(21874.022310, 19268.909000, 376.323211, 376.323211, 0.000000, X, Y) && !ellipse(31090.458862, 17184.807968, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 10:08:10 2011] Writing fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src20.gif
[Wed Nov 30 10:50:02 2011] Mean detx,y = (-1199.57, -1591.36) 
[Wed Nov 30 10:50:13 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 11:02:10 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 11:02:11 2011] Setting source spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Nov 30 11:02:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Nov 30 20:24:02 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:02 2011] Error reading totcts from fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Nov 30 20:24:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:04 2011] Using photon index=1.80, rate=0.0345, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src20.arf
[Wed Nov 30 20:24:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:04 2011] Updating source flux to 8.8e-14
[Wed Nov 30 20:29:51 2011] Flag c found in src. 20 procflags, skipping spectral fitting