[Tue Nov 29 19:44:25 2011] Detection parameters:
  Position = (281.6, 276.6) = 3 41 17.31 15 23 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1268.6 +/- 60.8
  Background counts = 461.2
  Rate = 0.04 +/- 0.002

[Tue Nov 29 19:44:28 2011] Off-axis axis estimate = 2.00'
[Tue Nov 29 19:50:57 2011] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 19:50:57 2011] Initial guess for spatial extent in simple fitting = 7.43"
[Tue Nov 29 19:50:57 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.026
[Tue Nov 29 19:50:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.43"
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src1.csv
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Nov 29 23:22:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src1.csv
[Tue Nov 29 23:22:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov 29 23:22:13 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov 29 23:22:13 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 04:22:07 2011] Spatial fit model total counts = 7697.930000, observed total counts = 7695.000000
[Wed Nov 30 04:22:07 2011] Offset between fit and detection position for source 1 = 0.880989 pixels
[Wed Nov 30 04:22:07 2011] 7853.526000 total counts/ 7263.220000 bgd. counts: snr = 6.926480
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.880989 pixels
  Position = (282.1, 275.8) = 3 41 17.18 15 23 58.9
  Extent = 6.9 (5.8-8.1)", rotation angle = 0
  Source counts = 590.3 +/- 88.6
  Background counts = 7263.2
  Rate = 0.01 +/- 0.002
[Wed Nov 30 04:22:07 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:07 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 04:22:07 2011] Source does appear to be extended
[Wed Nov 30 04:22:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:22:07 2011] Source is confused with source 3
[Wed Nov 30 04:22:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 04:22:46 2011] Initial guess for spatial extent in simple fitting = 6.91"
[Wed Nov 30 04:22:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.688
[Wed Nov 30 04:22:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.91"
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 07:05:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 07:05:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 07:05:45 2011] fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 07:05:45 2011] Fit fullrun_pn_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 30 10:07:34 2011] Warning, spatial fit 1 centroid is now closest to src. 16
[Wed Nov 30 10:07:34 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:34 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 10:07:34 2011] Source does appear to be extended
[Wed Nov 30 10:07:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 10:08:09 2011] XMMSAS src. selection expression = ellipse(24491.518200, 23944.478400, 414.661212, 414.661212, 0.000000, X, Y)
[Wed Nov 30 10:08:09 2011] Writing source region out to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 10:08:09 2011] Extracting stamp from image fullrun_pn_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (258, 252) - (306, 300)
[Wed Nov 30 10:08:09 2011] XMMSAS bgd. selection expression = annulus(24491.518200, 23944.478400, 691.102020, 1382.204040, X, Y) && !ellipse(23782.058000, 24283.788000, 1228.320035, 1228.320035, 0.000000, X, Y) && !ellipse(23713.770599, 25080.898285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.304000, 23643.484000, 1182.816034, 1182.816034, 0.000000, X, Y) && !ellipse(25974.294016, 23789.046005, 1264.192036, 831.997344, 13.695500, X, Y) && !ellipse(23356.408966, 23477.847351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25391.247314, 22905.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.876769, 23186.996986, 1233.296035, 557.400195, 199.605854, X, Y) && !ellipse(24157.304000, 22904.342000, 1299.032037, 1050.992030, 90.000000, X, Y) && !ellipse(25789.658200, 22616.669200, 1257.464036, 1257.464036, 0.000000, X, Y) && !ellipse(25957.552000, 25850.346000, 2075.840060, 2075.840060, 0.000000, X, Y) && !ellipse(24996.826782, 26044.055298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.330994, 25939.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26488.282000, 26108.746000, 1047.560030, 1047.560030, 0.000000, X, Y) && !ellipse(23132.502000, 25622.998000, 1185.544034, 1185.544034, 0.000000, X, Y) && !ellipse(25528.276000, 25179.718000, 1037.920030, 1037.920030, 0.000000, X, Y) && !ellipse(23884.396057, 22403.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.512200, 21975.488000, 910.800026, 910.800026, 0.000000, X, Y) && !ellipse(24359.463104, 21889.813263, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 10:08:09 2011] Writing fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 10:08:29 2011] Mean detx,y = (-118.70, -724.01) 
[Wed Nov 30 10:08:33 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 10:09:03 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 10:09:04 2011] Setting source spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 10:09:04 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 20:24:01 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:01 2011] Error reading totcts from fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 20:24:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:03 2011] Using photon index=1.80, rate=0.014, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 20:24:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:03 2011] Updating source flux to 4.1e-14
[Wed Nov 30 20:29:51 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Nov 30 20:35:59 2011] Reading fit data from xmm0505230401/analysis//spectral/fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1_pl.csv
[Wed Nov 30 20:35:59 2011] Spectral fit parameter nH value = 2.86801e+21
[Wed Nov 30 20:35:59 2011] Spectral fit parameter PhoIndex value = 2.40355
[Wed Nov 30 20:35:59 2011] Failed to get F(0.3-8.0) from xmm0505230401/analysis//spectral/fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov 30 20:35:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:35:59 2011] Using Nh = 2.9e+21, photon index=2.40, rate=0.014, arf fullrun_pn_xmm0505230401_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 20:35:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:35:59 2011] Updating source flux to 4.8e-14