[Tue Nov 29 19:46:00 2011] Detection parameters:
  Position = (118.1, 279.0) = 3 42 6.51 15 24 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.6 +/- 19.7
  Background counts = 22.5
  Rate = 0.005 +/- 0.0004

[Tue Nov 29 19:46:01 2011] Off-axis axis estimate = 13.15'
[Wed Nov 30 02:11:46 2011] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:11:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 02:11:46 2011] Initial guess for spatial extent in simple fitting = 13.00"
[Wed Nov 30 02:11:46 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Wed Nov 30 02:11:46 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 13.00"
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src10.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src10.csv
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src10.csv
[Wed Nov 30 04:21:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Nov 30 04:21:52 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Nov 30 04:22:32 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.399350 pixels away
[Wed Nov 30 04:22:32 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:32 2011] Assessing source extent using major
[Wed Nov 30 04:22:32 2011] Source does appear to be extended
[Wed Nov 30 04:22:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 08:47:29 2011] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 08:47:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 08:47:29 2011] Initial guess for spatial extent in simple fitting = 13.00"
[Wed Nov 30 08:47:29 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Wed Nov 30 08:47:29 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 13.00"
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src6.ximg exists
[Wed Nov 30 10:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src6.csv
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Nov 30 10:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src6.csv
[Wed Nov 30 10:07:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Nov 30 10:07:19 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Nov 30 10:07:51 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.391416 pixels away
[Wed Nov 30 10:07:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:52 2011] Assessing source extent using major
[Wed Nov 30 10:07:52 2011] Source does appear to be extended
[Wed Nov 30 10:07:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:15:43 2011] XMMSAS src. selection expression = ellipse(10224.474098, 24220.379395, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 19:15:43 2011] Writing source region out to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src5_src.reg
[Wed Nov 30 19:15:43 2011] Extracting stamp from image fullrun_mos2_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (81, 241) - (156, 316)
[Wed Nov 30 19:15:43 2011] XMMSAS bgd. selection expression = annulus(10224.474098, 24220.379395, 1087.500000, 2175.000000, X, Y)
[Wed Nov 30 19:15:43 2011] Writing fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src5.gif
[Wed Nov 30 19:17:27 2011] Mean detx,y = (-13650.58, 3718.61) 
[Wed Nov 30 19:17:29 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 19:17:45 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 19:17:45 2011] Setting source spectrum file to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Nov 30 19:17:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Nov 30 19:50:28 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov 30 19:50:28 2011] rmf not generated due to insufficient counts
[Wed Nov 30 20:24:08 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:08 2011] Error reading totcts from fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Nov 30 20:24:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:09 2011] Using photon index=1.80, rate=0.00468, arf fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src5.arf
[Wed Nov 30 20:24:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:09 2011] Updating source flux to 1e-13
[Wed Nov 30 20:26:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting