[Tue Nov 29 19:46:01 2011] Detection parameters:
  Position = (276.8, 265.1) = 3 41 18.76 15 23 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.3 +/- 26.7
  Background counts = 191.8
  Rate = 0.004 +/- 0.0006

[Tue Nov 29 19:46:01 2011] Off-axis axis estimate = 2.88'
[Wed Nov 30 02:11:46 2011] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:11:46 2011] Initial guess for spatial extent in simple fitting = 7.87"
[Wed Nov 30 02:11:46 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.750
[Wed Nov 30 02:11:46 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 7.87"
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src14.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src14.csv
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src14.csv
[Wed Nov 30 04:21:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Nov 30 04:21:52 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Nov 30 04:22:32 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.189691 pixels away
[Wed Nov 30 04:22:32 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:32 2011] Assessing source extent using major
[Wed Nov 30 04:22:32 2011] Source does appear to be extended
[Wed Nov 30 04:22:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 08:47:29 2011] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 08:47:29 2011] Initial guess for spatial extent in simple fitting = 7.87"
[Wed Nov 30 08:47:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.750
[Wed Nov 30 08:47:29 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.87"
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src10.ximg exists
[Wed Nov 30 10:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src10.csv
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Nov 30 10:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src10.csv
[Wed Nov 30 10:07:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Nov 30 10:07:19 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Nov 30 10:07:51 2011] Spatial fit model total counts = 3206.210000, observed total counts = 3208.000000
[Wed Nov 30 10:07:51 2011] Offset between fit and detection position for source 31 = 4.737516 pixels
[Wed Nov 30 10:07:51 2011] 3115.324000 total counts/ 2628.810000 bgd. counts: snr = 9.488897
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 4.737516 pixels
  Position = (278.2, 269.6) = 3 41 18.35 15 23 32.0
  Extent = 15.6 (15.4-15.7)", rotation angle = 0
  Source counts = 486.5 +/- 55.8
  Background counts = 2628.8
  Rate = 0.01 +/- 0.001
[Wed Nov 30 10:07:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:52 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 10:07:52 2011] Source does appear to be extended
[Wed Nov 30 10:07:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 10:07:52 2011] Source is confused with source 1
[Wed Nov 30 10:07:52 2011] Source is confused with source 29
[Wed Nov 30 19:15:43 2011] XMMSAS src. selection expression = ellipse(24154.949800, 23405.774000, 938.076027, 938.076027, 0.000000, X, Y)
[Wed Nov 30 19:15:43 2011] Writing source region out to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src31_src.reg
[Wed Nov 30 19:15:43 2011] Extracting stamp from image fullrun_mos2_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (224, 216) - (332, 324)
[Wed Nov 30 19:15:43 2011] XMMSAS bgd. selection expression = annulus(24154.949800, 23405.774000, 1563.460045, 3126.920090, X, Y) && !ellipse(24268.250400, 23786.857200, 981.592028, 981.592028, 0.000000, X, Y) && !ellipse(21918.861600, 24647.954800, 368.784811, 250.704007, 60.765700, X, Y) && !ellipse(23734.328491, 24756.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24206.884400, 24008.300000, 825.064024, 825.064024, 0.000000, X, Y) && !ellipse(24953.974609, 25355.845154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23419.965000, 25400.074000, 1196.328034, 1196.328034, 0.000000, X, Y) && !ellipse(24491.594000, 21959.444000, 886.848026, 886.848026, 0.000000, X, Y) && !ellipse(26715.746000, 23430.767800, 1178.472034, 1178.472034, 0.000000, X, Y) && !ellipse(26305.541168, 22822.764008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24824.735748, 22494.153687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.429800, 25483.940000, 1116.536032, 1116.536032, 0.000000, X, Y) && !ellipse(25851.722321, 25336.118286, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 19:15:43 2011] Writing fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src31.gif
[Wed Nov 30 19:18:59 2011] Mean detx,y = (150.94, 1138.78) 
[Wed Nov 30 19:19:01 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 19:19:14 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 19:19:14 2011] Setting source spectrum file to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Nov 30 19:19:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Nov 30 20:24:08 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:08 2011] Error reading totcts from fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Nov 30 20:24:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:09 2011] Using photon index=1.80, rate=0.01, arf fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src31.arf
[Wed Nov 30 20:24:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:09 2011] Updating source flux to 9.2e-14
[Wed Nov 30 20:26:45 2011] Flag c found in src. 31 procflags, skipping spectral fitting