[Tue Nov 29 19:46:01 2011] Detection parameters:
  Position = (296.0, 284.8) = 3 41 12.99 15 24 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.8 +/- 26.3
  Background counts = 177.5
  Rate = 0.004 +/- 0.0006

[Tue Nov 29 19:46:01 2011] Off-axis axis estimate = 1.00'
[Wed Nov 30 02:11:46 2011] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:11:46 2011] Initial guess for spatial extent in simple fitting = 6.93"
[Wed Nov 30 02:11:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Wed Nov 30 02:11:46 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 6.93"
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src15.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src15.csv
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src15.csv
[Wed Nov 30 04:21:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Nov 30 04:21:52 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Nov 30 04:22:32 2011] Spatial fit model total counts = 2933.990000, observed total counts = 2934.000000
[Wed Nov 30 04:22:32 2011] Offset between fit and detection position for source 25 = 0.024996 pixels
[Wed Nov 30 04:22:32 2011] 2768.711300 total counts/ 2721.310000 bgd. counts: snr = 0.908660
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.024996 pixels
  Position = (296.0, 284.8) = 3 41 12.98 15 24 38.2
  Extent = 4.2 (1.9-7.7)", rotation angle = 0
  Source counts = 47.4 +/- 52.6
  Background counts = 2721.3
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability