[Tue Nov 29 19:46:00 2011] Detection parameters:
  Position = (268.9, 294.1) = 3 41 21.15 15 25 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.2 +/- 25.0
  Background counts = 174.7
  Rate = 0.004 +/- 0.0005

[Tue Nov 29 19:46:01 2011] Off-axis axis estimate = 2.16'
[Wed Nov 30 02:11:46 2011] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:11:46 2011] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Nov 30 02:11:46 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Wed Nov 30 02:11:46 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 7.51"
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src17.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src17.csv
[Wed Nov 30 04:21:51 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Nov 30 04:21:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src17.csv
[Wed Nov 30 04:21:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Nov 30 04:21:52 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Nov 30 04:21:52 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Nov 30 04:22:32 2011] Spatial fit model total counts = 2181.990000, observed total counts = 2182.000000
[Wed Nov 30 04:22:32 2011] Offset between fit and detection position for source 23 = 1.842263 pixels
[Wed Nov 30 04:22:32 2011] 2183.864000 total counts/ 1745.970000 bgd. counts: snr = 10.479742
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.842263 pixels
  Position = (269.8, 292.5) = 3 41 20.89 15 25 11.7
  Extent = 15.0 (14.8-15.0)", rotation angle = 0
  Source counts = 437.9 +/- 46.7
  Background counts = 1746.0
  Rate = 0.009 +/- 0.001
[Wed Nov 30 04:22:32 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:32 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 04:22:32 2011] Source does appear to be extended
[Wed Nov 30 04:22:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:22:32 2011] Source is confused with source 2
[Wed Nov 30 08:47:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 08:47:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 08:47:29 2011] Initial guess for spatial extent in simple fitting = 14.95"
[Wed Nov 30 08:47:29 2011] source mask rpix=3.4, npix_max = 62, mask sum = 56, frac = 0.903
[Wed Nov 30 08:47:29 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 14.95"
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src12.ximg exists
[Wed Nov 30 10:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src12.csv
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Nov 30 10:07:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src12.csv
[Wed Nov 30 10:07:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Nov 30 10:07:19 2011] fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Nov 30 10:07:19 2011] Fit fullrun_mos2_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Nov 30 10:07:51 2011] Warning, spatial fit 12 centroid is now closest to src. 2
[Wed Nov 30 10:07:52 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:52 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 10:07:52 2011] Source does appear to be extended
[Wed Nov 30 10:07:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:15:43 2011] XMMSAS src. selection expression = ellipse(23419.965000, 25400.074000, 897.246026, 897.246026, 0.000000, X, Y)
[Wed Nov 30 19:15:43 2011] Writing source region out to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src23_src.reg
[Wed Nov 30 19:15:43 2011] Extracting stamp from image fullrun_mos2_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (218, 241) - (321, 344)
[Wed Nov 30 19:15:43 2011] XMMSAS bgd. selection expression = annulus(23419.965000, 25400.074000, 1495.410043, 2990.820086, X, Y) && !ellipse(24268.250400, 23786.857200, 981.592028, 981.592028, 0.000000, X, Y) && !ellipse(21918.861600, 24647.954800, 368.784811, 250.704007, 60.765700, X, Y) && !ellipse(23734.328491, 24756.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24206.884400, 24008.300000, 825.064024, 825.064024, 0.000000, X, Y) && !ellipse(24953.974609, 25355.845154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24154.949800, 23405.774000, 1250.768036, 1250.768036, 0.000000, X, Y) && !ellipse(24491.594000, 21959.444000, 886.848026, 886.848026, 0.000000, X, Y) && !ellipse(26715.746000, 23430.767800, 1178.472034, 1178.472034, 0.000000, X, Y) && !ellipse(26305.541168, 22822.764008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24824.735748, 22494.153687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.429800, 25483.940000, 1116.536032, 1116.536032, 0.000000, X, Y) && !ellipse(25851.722321, 25336.118286, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 19:15:43 2011] Writing fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src23.gif
[Wed Nov 30 19:19:22 2011] Mean detx,y = (-1106.88, -504.75) 
[Wed Nov 30 19:19:25 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 19:19:36 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 19:19:36 2011] Setting source spectrum file to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Nov 30 19:19:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Nov 30 20:24:08 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:08 2011] Error reading totcts from fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Nov 30 20:24:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:09 2011] Using photon index=1.80, rate=0.00901, arf fullrun_mos2_xmm0505230401_pi300-10000_pass1_cl_src23.arf
[Wed Nov 30 20:24:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:10 2011] Updating source flux to 8e-14
[Wed Nov 30 20:26:45 2011] Flag c found in src. 23 procflags, skipping spectral fitting