[Tue Nov 29 19:45:03 2011] Detection parameters: Position = (289.2, 282.9) = 3 41 15.03 15 24 31.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 265.8 +/- 30.4 Background counts = 187.1 Rate = 0.006 +/- 0.0006 [Tue Nov 29 19:45:05 2011] Off-axis axis estimate = 1.31' [Tue Nov 29 23:22:15 2011] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 23:22:15 2011] Initial guess for spatial extent in simple fitting = 7.08" [Tue Nov 29 23:22:15 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.883 [Tue Nov 29 23:22:15 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 7.08" [Wed Nov 30 02:11:43 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src8.ximg exists [Wed Nov 30 02:11:43 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src8_1.ximg exists [Wed Nov 30 02:11:43 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src8 appears to have run properly [Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Wed Nov 30 02:11:45 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Wed Nov 30 04:22:21 2011] Spatial fit model total counts = 3723.280000, observed total counts = 3719.000000 [Wed Nov 30 04:22:21 2011] Offset between fit and detection position for source 3 = 0.932959 pixels [Wed Nov 30 04:22:21 2011] 3598.841000 total counts/ 3403.520000 bgd. counts: snr = 3.347995 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.932959 pixels Position = (289.5, 282.0) = 3 41 14.96 15 24 25.9 Extent = 14.1 (14.0-14.2)", rotation angle = 0 Source counts = 195.3 +/- 60.0 Background counts = 3403.5 Rate = 0.004 +/- 0.001 [Wed Nov 30 04:22:21 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 04:22:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 04:22:21 2011] Assessing source extent using major axis lower bound [Wed Nov 30 04:22:21 2011] Source does appear to be extended [Wed Nov 30 04:22:21 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 04:22:21 2011] Source is confused with source 6 [Wed Nov 30 07:05:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Nov 30 07:05:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Nov 30 07:05:46 2011] Initial guess for spatial extent in simple fitting = 14.10" [Wed Nov 30 07:05:46 2011] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.000 [Wed Nov 30 07:05:46 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 14.10" [Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src7.ximg exists [Wed Nov 30 08:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src7.csv [Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src7_1.ximg exists [Wed Nov 30 08:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src7.csv [Wed Nov 30 08:47:28 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Wed Nov 30 08:47:28 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Wed Nov 30 10:07:43 2011] Spatial fit model total counts = 4453.350000, observed total counts = 4452.000000 [Wed Nov 30 10:07:43 2011] Offset between fit and detection position for source 3 = 1.691966 pixels [Wed Nov 30 10:07:43 2011] Warning, changing simple spatial fit ID from 7 to 4 [Wed Nov 30 10:07:43 2011] 4235.185000 total counts/ 3965.860000 bgd. counts: snr = 4.276692 Spatial fit parameters: Offset between fit and detection position for source 3 = 1.691966 pixels Position = (291.2, 282.0) = 3 41 14.45 15 24 25.8 Extent = 14.5 (14.5-29.0)", rotation angle = 0 Source counts = 269.3 +/- 65.1 Background counts = 3965.9 Rate = 0.006 +/- 0.001 [Wed Nov 30 10:07:44 2011] Vigneting correction estimate = 1.000000 [Wed Nov 30 10:07:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Nov 30 10:07:44 2011] Assessing source extent using major axis lower bound [Wed Nov 30 10:07:44 2011] Source does appear to be extended [Wed Nov 30 10:07:44 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 30 17:17:51 2011] XMMSAS src. selection expression = ellipse(25281.874000, 24481.406000, 871.128025, 871.128025, 0.000000, X, Y) [Wed Nov 30 17:17:52 2011] Writing source region out to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src3_src.reg [Wed Nov 30 17:17:52 2011] Extracting stamp from image fullrun_mos1_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (241, 232) - (341, 332) [Wed Nov 30 17:17:52 2011] XMMSAS bgd. selection expression = annulus(25281.874000, 24481.406000, 1451.880042, 2903.760084, X, Y) && !ellipse(24337.240000, 23636.482800, 1661.232048, 1661.232048, 0.000000, X, Y) && !ellipse(25154.961200, 23458.395000, 479.180014, 479.180014, 0.000000, X, Y) && !ellipse(24615.038000, 23776.532000, 1894.552055, 1894.552055, 0.000000, X, Y) && !ellipse(25023.286804, 24132.290833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.470720, 22342.087200, 563.350416, 563.350416, 0.000000, X, Y) && !ellipse(25236.634338, 22982.448090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.376770, 23781.354370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24328.520400, 22427.978400, 1293.296037, 1293.296037, 0.000000, X, Y) && !ellipse(25103.020000, 25311.572000, 1062.992031, 1062.992031, 0.000000, X, Y) && !ellipse(23562.757843, 22744.637115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26838.901800, 22776.904000, 1222.464035, 1222.464035, 0.000000, X, Y) && !ellipse(25734.319580, 24738.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24804.164581, 21724.057129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26346.196000, 25452.068000, 1548.688045, 1474.120042, 359.890889, X, Y) && !ellipse(24686.137909, 22484.595581, 870.000000, 870.000000, 0.000000, X, Y) [Wed Nov 30 17:17:52 2011] Writing fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src3.gif [Wed Nov 30 17:28:27 2011] Mean detx,y = (210.69, -1036.78) [Wed Nov 30 17:28:29 2011] Setting backscal keywords in source and bgd. spectrum [Wed Nov 30 17:28:43 2011] Binned source spectrum to 10 counts/bin [Wed Nov 30 17:28:43 2011] Setting source spectrum file to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Nov 30 17:28:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed Nov 30 20:24:06 2011] Updating aperture counts using extracted products [Wed Nov 30 20:24:06 2011] Error reading totcts from fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed Nov 30 20:24:07 2011] Calculating source flux in energy range 0.30-8.00 [Wed Nov 30 20:24:07 2011] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src3.arf [Wed Nov 30 20:24:07 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Nov 30 20:24:07 2011] Updating source flux to 5.1e-14 [Wed Nov 30 20:24:12 2011] Flag c found in src. 3 procflags, skipping spectral fitting