[Tue Nov 29 19:45:04 2011] Detection parameters:
  Position = (296.5, 279.0) = 3 41 12.85 15 24 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.4 +/- 27.3
  Background counts = 173.3
  Rate = 0.005 +/- 0.0006

[Tue Nov 29 19:45:05 2011] Off-axis axis estimate = 1.42'
[Tue Nov 29 23:22:15 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 23:22:15 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Tue Nov 29 23:22:15 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.091
[Tue Nov 29 23:22:15 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.14"
[Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src10.ximg exists
[Wed Nov 30 02:11:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src10.csv
[Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Nov 30 02:11:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src10.csv
[Wed Nov 30 02:11:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 02:11:45 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Nov 30 02:11:45 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Nov 30 02:11:45 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Nov 30 04:22:21 2011] Spatial fit model total counts = 3312.990000, observed total counts = 3313.000000
[Wed Nov 30 04:22:21 2011] Offset between fit and detection position for source 26 = 0.496092 pixels
[Wed Nov 30 04:22:21 2011] 3121.187900 total counts/ 3079.830000 bgd. counts: snr = 0.745238
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.496092 pixels
  Position = (296.8, 279.3) = 3 41 12.75 15 24 14.3
  Extent = 3.6 (1.8-5.7)", rotation angle = 0
  Source counts = 41.4 +/- 55.9
  Background counts = 3079.8
  Rate = 0.0009 +/- 0.001
  Deleting source due to low Poisson probability