[Tue Nov 29 19:45:03 2011] Detection parameters:
  Position = (280.9, 273.1) = 3 41 17.52 15 23 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 720.7 +/- 40.6
  Background counts = 202.6
  Rate = 0.02 +/- 0.0009

[Tue Nov 29 19:45:05 2011] Off-axis axis estimate = 2.23'
[Tue Nov 29 23:22:15 2011] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 23:22:15 2011] Initial guess for spatial extent in simple fitting = 7.55"
[Tue Nov 29 23:22:15 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Tue Nov 29 23:22:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.55"
[Wed Nov 30 02:11:43 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 02:11:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 02:11:43 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 02:11:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 02:11:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 02:11:44 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 04:22:21 2011] Spatial fit model total counts = 4488.570000, observed total counts = 4495.000000
[Wed Nov 30 04:22:21 2011] Offset between fit and detection position for source 2 = 0.487906 pixels
[Wed Nov 30 04:22:21 2011] 4484.824000 total counts/ 3950.870000 bgd. counts: snr = 8.494884
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.487906 pixels
  Position = (280.5, 273.1) = 3 41 17.67 15 23 47.4
  Extent = 10.4 (7.3-13.0)", rotation angle = 0
  Source counts = 534.0 +/- 67.0
  Background counts = 3950.9
  Rate = 0.01 +/- 0.001
[Wed Nov 30 04:22:21 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:21 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 04:22:21 2011] Source does appear to be extended
[Wed Nov 30 04:22:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:22:21 2011] Source is confused with source 9
[Wed Nov 30 07:05:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 07:05:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 07:05:46 2011] Initial guess for spatial extent in simple fitting = 10.39"
[Wed Nov 30 07:05:46 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Wed Nov 30 07:05:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.39"
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 08:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 08:47:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 08:47:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 08:47:28 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 30 10:07:43 2011] Spatial fit model total counts = 6548.010000, observed total counts = 6548.000000
[Wed Nov 30 10:07:43 2011] Offset between fit and detection position for source 2 = 0.904243 pixels
[Wed Nov 30 10:07:43 2011] 6278.020000 total counts/ 4988.850000 bgd. counts: snr = 18.251979
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.904243 pixels
  Position = (280.3, 272.2) = 3 41 17.72 15 23 43.5
  Extent = 20.8 (20.7-20.8)", rotation angle = 0
  Source counts = 1289.2 +/- 79.2
  Background counts = 4988.9
  Rate = 0.03 +/- 0.002
[Wed Nov 30 10:07:44 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:44 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 10:07:44 2011] Source does appear to be extended
[Wed Nov 30 10:07:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:17:51 2011] Counts = 1289.170000, rescaling region sizes by 2.000000
[Wed Nov 30 17:17:51 2011] XMMSAS src. selection expression = ellipse(24337.240000, 23636.482800, 2491.848072, 2491.848072, 0.000000, X, Y)
[Wed Nov 30 17:17:51 2011] Writing source region out to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2_src.reg
[Wed Nov 30 17:17:51 2011] Extracting stamp from image fullrun_mos1_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (137, 129) - (424, 415)
[Wed Nov 30 17:17:51 2011] XMMSAS bgd. selection expression = annulus(24337.240000, 23636.482800, 8306.160239, 16612.320478, X, Y) && !ellipse(25154.961200, 23458.395000, 479.180014, 479.180014, 0.000000, X, Y) && !ellipse(24615.038000, 23776.532000, 1894.552055, 1894.552055, 0.000000, X, Y) && !ellipse(25023.286804, 24132.290833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.470720, 22342.087200, 563.350416, 563.350416, 0.000000, X, Y) && !ellipse(21919.075000, 24668.022000, 293.733608, 293.733608, 0.000000, X, Y) && !ellipse(25281.874000, 24481.406000, 1161.504033, 1161.504033, 0.000000, X, Y) && !ellipse(25236.634338, 22982.448090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10221.203766, 24219.957245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25946.376770, 23781.354370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12767.729980, 18458.479950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24328.520400, 22427.978400, 1293.296037, 1293.296037, 0.000000, X, Y) && !ellipse(25103.020000, 25311.572000, 1062.992031, 1062.992031, 0.000000, X, Y) && !ellipse(19498.634140, 15615.685654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23562.757843, 22744.637115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26838.901800, 22776.904000, 1222.464035, 1222.464035, 0.000000, X, Y) && !ellipse(25734.319580, 24738.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21869.250061, 19245.032379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24804.164581, 21724.057129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34157.410645, 24242.469238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26346.196000, 25452.068000, 1548.688045, 1474.120042, 359.890889, X, Y) && !ellipse(24686.137909, 22484.595581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33972.546265, 35729.485352, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 17:17:51 2011] Writing fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2.gif
[Wed Nov 30 17:18:08 2011] Mean detx,y = (1075.65, -398.46) 
[Wed Nov 30 17:18:11 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 17:26:24 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 17:26:24 2011] Setting source spectrum file to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov 30 17:26:24 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Nov 30 20:24:06 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:06 2011] Error reading totcts from fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov 30 20:24:07 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:07 2011] Using photon index=1.80, rate=0.0265, arf fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2.arf
[Wed Nov 30 20:24:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:07 2011] Updating source flux to 2.2e-13
[Wed Nov 30 20:24:12 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Nov 30 20:26:45 2011] Reading fit data from xmm0505230401/analysis//spectral/fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2_pl.csv
[Wed Nov 30 20:26:45 2011] Spectral fit parameter nH value = 3.31843e+21
[Wed Nov 30 20:26:45 2011] Spectral fit parameter PhoIndex value = 2.521
[Wed Nov 30 20:26:45 2011] Failed to get F(0.3-8.0) from xmm0505230401/analysis//spectral/fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Nov 30 20:26:45 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:26:45 2011] Using Nh = 3.3e+21, photon index=2.52, rate=0.0265, arf fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src2.arf
[Wed Nov 30 20:26:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:26:45 2011] Updating source flux to 2.1e-13