[Tue Nov 29 19:45:03 2011] Detection parameters:
  Position = (290.6, 264.7) = 3 41 14.61 15 23 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.9 +/- 25.4
  Background counts = 162.8
  Rate = 0.005 +/- 0.0006

[Tue Nov 29 19:45:05 2011] Off-axis axis estimate = 2.51'
[Tue Nov 29 23:22:15 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 23:22:15 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Tue Nov 29 23:22:15 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Tue Nov 29 23:22:15 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 7.68"
[Wed Nov 30 02:11:43 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src9.ximg exists
[Wed Nov 30 02:11:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src9.csv
[Wed Nov 30 02:11:44 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Nov 30 02:11:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src9.csv
[Wed Nov 30 02:11:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 02:11:45 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Nov 30 02:11:45 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Nov 30 02:11:45 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Nov 30 04:22:21 2011] Warning, spatial fit 9 centroid is now closest to src. 33
[Wed Nov 30 04:22:21 2011] Source 10 is offset by -2.312571 and 7.849449 pixels which is larger than
2 X fitted extent = 6.993012 x 6.993012, not incorporating fit results
[Wed Nov 30 04:22:21 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 04:22:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 04:22:21 2011] Assessing source extent using major
[Wed Nov 30 04:22:21 2011] Source does appear to be extended
[Wed Nov 30 04:22:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:22:21 2011] Source is confused with source 1
[Wed Nov 30 07:05:46 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 07:05:46 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Nov 30 07:05:46 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Wed Nov 30 07:05:46 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 7.68"
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src8.ximg exists
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Nov 30 08:47:28 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Nov 30 08:47:28 2011] fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Nov 30 08:47:28 2011] Fit fullrun_mos1_xmm0505230401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Nov 30 10:07:44 2011] Source 10 is offset by 3.568404 and -5.993088 pixels which is larger than
2 X fitted extent = 7.064828 x 4.820282, not incorporating fit results
[Wed Nov 30 10:07:44 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 10:07:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 10:07:44 2011] Assessing source extent using major
[Wed Nov 30 10:07:44 2011] Source does appear to be extended
[Wed Nov 30 10:07:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:17:52 2011] XMMSAS src. selection expression = ellipse(25236.634338, 22982.448090, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 17:17:52 2011] Writing source region out to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src10_src.reg
[Wed Nov 30 17:17:52 2011] Extracting stamp from image fullrun_mos1_xmm0505230401_pi300-10000_cl_sm2.00.img.gz, (253, 227) - (328, 302)
[Wed Nov 30 17:17:52 2011] XMMSAS bgd. selection expression = annulus(25236.634338, 22982.448090, 1087.500000, 2175.000000, X, Y) && !ellipse(24337.240000, 23636.482800, 1661.232048, 1661.232048, 0.000000, X, Y) && !ellipse(25154.961200, 23458.395000, 479.180014, 479.180014, 0.000000, X, Y) && !ellipse(24615.038000, 23776.532000, 1894.552055, 1894.552055, 0.000000, X, Y) && !ellipse(25023.286804, 24132.290833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.470720, 22342.087200, 563.350416, 563.350416, 0.000000, X, Y) && !ellipse(25281.874000, 24481.406000, 1161.504033, 1161.504033, 0.000000, X, Y) && !ellipse(25946.376770, 23781.354370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24328.520400, 22427.978400, 1293.296037, 1293.296037, 0.000000, X, Y) && !ellipse(25103.020000, 25311.572000, 1062.992031, 1062.992031, 0.000000, X, Y) && !ellipse(23562.757843, 22744.637115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26838.901800, 22776.904000, 1222.464035, 1222.464035, 0.000000, X, Y) && !ellipse(25734.319580, 24738.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24804.164581, 21724.057129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26346.196000, 25452.068000, 1548.688045, 1474.120042, 359.890889, X, Y) && !ellipse(24686.137909, 22484.595581, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 17:17:52 2011] Writing fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src10.gif
[Wed Nov 30 17:28:50 2011] Mean detx,y = (1559.85, -1344.92) 
[Wed Nov 30 17:28:53 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 17:29:02 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 17:29:02 2011] Setting source spectrum file to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 17:29:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Nov 30 18:53:00 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov 30 18:53:00 2011] rmf not generated due to insufficient counts
[Wed Nov 30 20:24:06 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:24:06 2011] Error reading totcts from fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Nov 30 20:24:07 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:24:07 2011] Using photon index=1.80, rate=0.005, arf fullrun_mos1_xmm0505230401_pi300-10000_pass1_cl_src10.arf
[Wed Nov 30 20:24:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:24:07 2011] Updating source flux to 5e-14
[Wed Nov 30 20:24:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting