[Wed Aug 22 10:19:48 2012] Detection parameters:
  Position = (288.9, 277.8) = 0 56 12.75 -1 15 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.5 +/- 15.8
  Background counts = 66.3
  Rate = 0.006 +/- 0.001

[Wed Aug 22 10:19:48 2012] Off-axis axis estimate = 1.65'
[Wed Aug 22 10:49:32 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:49:32 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug 22 10:49:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Wed Aug 22 10:49:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.25"
[Wed Aug 22 11:03:19 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 22 11:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src3.csv
[Wed Aug 22 11:03:19 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 22 11:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src3.csv
[Wed Aug 22 11:03:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 11:03:20 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 22 11:03:20 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 22 11:03:20 2012] Fit fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 22 11:03:29 2012] Spatial fit model total counts = 730.474000, observed total counts = 715.000000
[Wed Aug 22 11:03:29 2012] Offset between fit and detection position for source 4 = 0.239061 pixels
[Wed Aug 22 11:03:29 2012] 734.083700 total counts/ 679.197000 bgd. counts: snr = 2.106053
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.239061 pixels
  Position = (288.9, 278.0) = 0 56 12.74 -1 15 25.4
  Extent = 8.3 (3.1-14.5)", rotation angle = 0
  Source counts = 54.9 +/- 27.1
  Background counts = 679.2
  Rate = 0.004 +/- 0.002
[Wed Aug 22 11:03:29 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 11:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 11:03:29 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 11:03:29 2012] Source does appear to be extended
[Wed Aug 22 11:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 11:03:29 2012] Source is confused with source 6
[Wed Aug 22 11:23:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 11:23:08 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Wed Aug 22 11:23:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.867
[Wed Aug 22 11:23:08 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.27"
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 22 11:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src3.csv
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 22 11:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src3.csv
[Wed Aug 22 11:35:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 22 11:35:47 2012] Fit fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 22 11:35:54 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Wed Aug 22 11:35:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 11:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 11:35:54 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 11:35:54 2012] Source does appear to be extended
[Wed Aug 22 11:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 11:45:48 2012] XMMSAS src. selection expression = ellipse(25085.654800, 24138.909384, 496.367414, 496.367414, 0.000000, X, Y)
[Wed Aug 22 11:45:48 2012] Writing source region out to fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 22 11:45:48 2012] Extracting stamp from image fullrun_mos2_xmm0505211001_pi300-10000_cl_sm2.00.img.gz, (260, 249) - (317, 307)
[Wed Aug 22 11:45:48 2012] XMMSAS bgd. selection expression = annulus(25085.654800, 24138.909384, 827.279024, 1654.558048, X, Y) && !ellipse(24158.437561, 24289.229614, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Aug 22 11:45:48 2012] Writing fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4.gif
[Wed Aug 22 11:46:36 2012] Mean detx,y = (1064.42, 309.90) 
[Wed Aug 22 11:46:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 11:46:48 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 11:46:48 2012] Setting source spectrum file to fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 11:46:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 22 11:49:29 2012] Not generating rmf since there are only 54 counts
[Wed Aug 22 11:49:29 2012] rmf not generated due to insufficient counts
[Wed Aug 22 11:53:00 2012] Updating aperture counts using extracted products
[Wed Aug 22 11:53:00 2012] Error reading totcts from fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 11:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 11:53:00 2012] Using photon index=1.80, rate=0.00438, arf fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4.arf
[Wed Aug 22 11:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 11:53:00 2012] Updating source flux to 4.4e-14
[Wed Aug 22 11:53:02 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Wed Aug 22 11:53:02 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 22 11:53:03 2012] xmm0505211001/analysis//spectral/fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete