[Wed Aug 22 10:19:48 2012] Detection parameters:
  Position = (203.7, 334.7) = 0 56 37.44 -1 11 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.4 +/- 12.1
  Background counts = 25.7
  Rate = 0.006 +/- 0.001

[Wed Aug 22 10:19:48 2012] Off-axis axis estimate = 7.35'
[Wed Aug 22 10:49:32 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:49:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 10:49:32 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Wed Aug 22 10:49:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Wed Aug 22 10:49:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.10"
[Wed Aug 22 11:03:19 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src2.ximg exists
[Wed Aug 22 11:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src2.csv
[Wed Aug 22 11:03:19 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Aug 22 11:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src2.csv
[Wed Aug 22 11:03:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 11:03:20 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Aug 22 11:03:20 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Aug 22 11:03:20 2012] Fit fullrun_mos2_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Aug 22 11:03:29 2012] Spatial fit model total counts = 216.949000, observed total counts = 217.000000
[Wed Aug 22 11:03:29 2012] Offset between fit and detection position for source 2 = 0.351801 pixels
[Wed Aug 22 11:03:29 2012] 217.153100 total counts/ 180.970000 bgd. counts: snr = 2.689692
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.351801 pixels
  Position = (204.0, 334.8) = 0 56 37.35 -1 11 18.4
  Extent = 5.7 (3.7-8.2)", rotation angle = 0
  Source counts = 36.2 +/- 14.7
  Background counts = 181.0
  Rate = 0.003 +/- 0.001
[Wed Aug 22 11:03:29 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 11:03:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 11:03:29 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 11:03:29 2012] Source does appear to be extended
[Wed Aug 22 11:03:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 11:23:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 11:23:08 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Wed Aug 22 11:23:08 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.218
[Wed Aug 22 11:23:08 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.71"
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src2.ximg exists
[Wed Aug 22 11:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src2.csv
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Aug 22 11:35:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src2.csv
[Wed Aug 22 11:35:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Aug 22 11:35:47 2012] fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Aug 22 11:35:47 2012] Fit fullrun_mos2_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Aug 22 11:35:54 2012] Spatial fit model total counts = 216.000000, observed total counts = 216.000000
[Wed Aug 22 11:35:54 2012] Offset between fit and detection position for source 2 = 0.048997 pixels
[Wed Aug 22 11:35:54 2012] 218.458800 total counts/ 182.555000 bgd. counts: snr = 2.657318
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.048997 pixels
  Position = (204.0, 334.8) = 0 56 37.37 -1 11 18.4
  Extent = 5.7 (3.6-8.1)", rotation angle = 0
  Source counts = 35.9 +/- 14.8
  Background counts = 182.6
  Rate = 0.003 +/- 0.001
[Wed Aug 22 11:35:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 11:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 11:35:54 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 11:35:54 2012] Source does appear to be extended
[Wed Aug 22 11:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 11:45:48 2012] XMMSAS src. selection expression = ellipse(17697.871966, 29078.831660, 342.958481, 342.958481, 0.000000, X, Y)
[Wed Aug 22 11:45:48 2012] Writing source region out to fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug 22 11:45:48 2012] Extracting stamp from image fullrun_mos2_xmm0505211001_pi300-10000_cl_sm2.00.img.gz, (184, 315) - (224, 355)
[Wed Aug 22 11:45:48 2012] XMMSAS bgd. selection expression = annulus(17697.871966, 29078.831660, 571.597469, 1143.194937, X, Y)
[Wed Aug 22 11:45:48 2012] Writing fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2.gif
[Wed Aug 22 11:46:13 2012] Mean detx,y = (-7607.51, -1483.61) 
[Wed Aug 22 11:46:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 11:46:31 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 11:46:31 2012] Setting source spectrum file to fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug 22 11:46:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Aug 22 11:49:24 2012] Not generating rmf since there are only 35 counts
[Wed Aug 22 11:49:24 2012] rmf not generated due to insufficient counts
[Wed Aug 22 11:53:00 2012] Updating aperture counts using extracted products
[Wed Aug 22 11:53:00 2012] Error reading totcts from fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug 22 11:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 11:53:00 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2.arf
[Wed Aug 22 11:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 11:53:00 2012] Updating source flux to 4.5e-14
[Wed Aug 22 11:53:02 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 22 11:53:03 2012] xmm0505211001/analysis//spectral/fullrun_mos2_xmm0505211001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete